Kremenchuk CHP power station is a 255 MW gas power station in Poltava, Ukraine. It is operated by Kremenchuk CHP LLC [100%]. Based on its capacity (estimated), it can supply roughly 287k homes (estimated). It ranks #47 of 98 Ukraine power plants by installed capacity. Commissioned in 1965, it is around 61 years old — an older, legacy facility. In context, gas supplies about 6.4% of Ukraine's electricity; the national grid averages 250 gCO₂/kWh (72.2% low-carbon) (2022).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GOGPT_kremenchukchp_ukrain.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The public capacity above is the current source-record value. A 2026 tracker candidate lists 255 MW for Kremenchuk CHP power station, but it is not used as the public primary value until scope is verified (unit vs operating vs installed/project total).
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM · 2026 · L100000407976; fuel: GEM GOGPT
At 255 MW, Kremenchuk CHP power station is around the median gas plant in Ukraine (250 MW). Technically it is described as Steam. Gas plants burn natural gas either in open-cycle turbines for fast peaking, or in combined-cycle units that recover exhaust heat in an HRSG to reach roughly 55–62% efficiency — the cleanest-burning fossil option.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Kremenchuk CHP LLC [100%].
This gas plant burns natural gas in a turbine — often in a combined-cycle setup — to generate electricity. It sits in a warm-summer humid continental climate (Köppen Dfb) — Northern Hemisphere, latitude 49.2°N — which shapes how much energy it can produce and how its output varies through the year.
Climate zone & typical temperatures: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with thermal cycling the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #13 largest gas power plant of 30 in Ukraine by capacity.
Ukraine has 30 gas power plants in this dataset, together about 9,279 MW of capacity.
Coordinates 49.17079, 33.447371 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Kremenchuk CHP power station is a 255 MW gas power plant in Poltava, Ukraine, commissioned in 1965.
Its output is enough to supply roughly 287,202 homes (estimated).
Kremenchuk CHP power station is operated by Kremenchuk CHP LLC [100%].
