Coal power plant in Moravian-Silesian, Czech Republic. Approximate location 49.823463, 18.480287.
CoalMoravian-SilesianCzech Republicsubcritical
Karvina power station is a 125 MW coal power station in Moravian-Silesian, Czech Republic. It is operated by Veolia Ceska Republika AS [100%]. Based on its capacity (estimated), it can supply roughly 156k homes (estimated). It ranks #31 of 481 Czech Republic power plants by installed capacity. Commissioned in 1970, it is around 56 years old — an older, legacy facility. In context, coal supplies about 35.2% of Czech Republic's electricity; the national grid averages 401 gCO₂/kWh (59.2% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GEM_coa_karvina_czech.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The public capacity above is the current source-record value. A 2026 tracker candidate lists 55 MW for Karvina power station, but it is not used as the public primary value until scope is verified (unit vs operating vs installed/project total).
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: GEM GCPT; fuel: GEM GCPT
At 125 MW, Karvina power station is below the median coal plant in Czech Republic (165 MW). Technically it is described as subcritical. Coal plants burn pulverised coal to raise high-pressure steam for a turbine; they run as baseload but are the most carbon-intensive mainstream source and the first targeted for retirement or efficiency retrofits.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Veolia Ceska Republika AS [100%].
This coal plant burns coal to raise high-pressure steam that spins a turbine-generator. It sits in a temperate oceanic climate (Köppen Cfb) — Northern Hemisphere, latitude 49.8°N — which shapes how much energy it can produce and how its output varies through the year.
Climate zone & typical temperatures: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #21 largest coal power plant of 32 in Czech Republic by capacity.
Czech Republic has 32 coal power plants in this dataset, together about 9,811 MW of capacity.
Coordinates 49.823463, 18.480287 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Karvina power station is a 125 MW coal power plant in Moravian-Silesian, Czech Republic, commissioned in 1970.
Its output is enough to supply roughly 156,428 homes (estimated).
Karvina power station is operated by Veolia Ceska Republika AS [100%].