Jiangsu Xuwei nuclear power plant is a 6,152 MW nuclear power station in Jiangsu, China. It is operated by China National Nuclear Corp [51%]; Jiangsu Guoxin Group Co Ltd [20%]; Lianyungan. Based on its capacity (estimated), it can supply roughly 14 million homes (estimated). It ranks #32 of 6,685 China power plants by installed capacity. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, nuclear supplies about 4.6% of China's electricity; the national grid averages 525 gCO₂/kWh (41.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GEM_nuc_jiangsuxuwei_china.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: GEM GNPT; fuel: GEM GNPT
At 6,152 MW, Jiangsu Xuwei nuclear power plant is well above the median nuclear plant in China (5,000 MW). Technically it is described as pressurized water reactor. Its current lifecycle status is “Pre Construction” — so it is not yet, or no longer, generating at full output. Nuclear plants split uranium to raise steam with no direct CO₂; they run as steady baseload with very high capacity factors and the longest operating lifetimes of any thermal plant.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by China National Nuclear Corp [51%]; Jiangsu Guoxin Group Co Ltd [20%]; Lianyungan.
This nuclear plant uses heat from nuclear fission to raise steam for a turbine-generator. It sits in a humid subtropical (dry winter) climate (Köppen Cwa) — Northern Hemisphere, latitude 34.6°N — which shapes how much energy it can produce and how its output varies through the year.
Climate zone & typical temperatures: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with thermal cycling the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #24 largest nuclear power plant of 72 in China by capacity.
China has 72 nuclear power plants in this dataset, together about 337,738 MW of capacity.
Coordinates 34.625076, 119.508261 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Jiangsu Xuwei nuclear power plant is a 6,152 MW nuclear power plant in Jiangsu, China.
Its output is enough to supply roughly 13,857,819 homes (estimated).
Jiangsu Xuwei nuclear power plant is operated by China National Nuclear Corp [51%]; Jiangsu Guoxin Group Co Ltd [20%]; Lianyungan.
