Jiangsu Rudong Huangang Dongling Wind is a 100 MW wind power station in Jiangsu Sheng, China. Based on its capacity (estimated), it can supply roughly 85k homes (estimated). It ranks #2585 of 6,685 China power plants by installed capacity. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, wind supplies about 10.7% of China's electricity; the national grid averages 525 gCO₂/kWh (41.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1070954.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The public capacity above is the current source-record value. A 2026 tracker candidate lists 150 MW for Jiangsu Rudong Dongling (Guoxin) wind fa, but it is not used as the public primary value until scope is verified (unit vs operating vs installed/project total).
Capacity claim grade: B_SCOPE_PARENT_COMPLEX - recommended action: build_parent_complex_model - confidence: not_comparable_without_scope. This follows a claim-based data model: value + scope + source + confidence, rather than silently overwriting records.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000902435); fuel: WRI source-record fuel
At 100 MW, Jiangsu Rudong Huangang Dongling Wind is well above the median wind plant in China (49 MW). Wind turbines convert moving air into electricity; output is variable and site-dependent, and modern turbines deliver some of the lowest-cost new generation on many grids.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
This wind plant converts the kinetic energy of wind into electricity through turbine rotors. It sits in a humid subtropical climate (Köppen Cfa) — Northern Hemisphere, latitude 32.4°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 25% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 40/100 — this site sits in the mid third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #53 largest wind power plant of 835 in China by capacity.
China has 835 wind power plants in this dataset, together about 52,236 MW of capacity.
Coordinates 32.3508, 121.3372 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Jiangsu Rudong Huangang Dongling Wind is a 100 MW source-record wind power plant in Jiangsu Sheng, China.
Its output is enough to supply roughly 85,097 homes (estimated).
