Hydro power plant in Canterbury, New Zealand. Approximate location -43.6333, 171.65.
HydroCanterburyNew Zealand
Highbank is a 26 MW hydro power plant in Canterbury, New Zealand. It is operated by Trustpower. Based on its capacity (estimated), it can supply roughly 27k homes (estimated). It ranks #48 of 50 New Zealand power plants by installed capacity. Commissioned in 1984, it is around 42 years old — long-established. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 54.8% of New Zealand's electricity; the national grid averages 93 gCO₂/kWh (88.5% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1000345.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: Wikidata P2109 nameplate capacity; fuel: WRI source-record fuel
At 26 MW, Highbank is below the median hydro plant in New Zealand (90 MW). Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Trustpower.
This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a temperate oceanic climate (Köppen Cfb) — Southern Hemisphere, latitude 43.6°S — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 5% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 52/100 — this site sits in the mid third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #23 largest hydro power plant of 24 in New Zealand by capacity.
New Zealand has 24 hydro power plants in this dataset, together about 4,388 MW of capacity.
Coordinates -43.6333, 171.65 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Highbank is a 26 MW source-record hydro power plant in Canterbury, New Zealand, commissioned in 1984.
Its output is enough to supply roughly 26,530 homes (estimated).
Highbank is operated by Trustpower.
