Heilongjiang Yichun (Zhongke) power station is a 12 MW biomass power plant in Heilongjiang Sheng, China. Based on its capacity (estimated), it can supply roughly 17k homes (estimated). It ranks #5992 of 6,685 China power plants by installed capacity. In context, biomass supplies about 2.0% of China's electricity; the national grid averages 525 gCO₂/kWh (41.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id CT-3826.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: Climate TRACE source-record capacity (modelled/legacy); fuel: Climate TRACE source-record fuel
At 12 MW, Heilongjiang Yichun (Zhongke) power station is below the median biomass plant in China (30 MW). Biomass plants burn organic material such as wood, residues or waste-derived fuel to raise steam; they are dispatchable and counted as low-carbon where the feedstock is sustainably sourced.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
This biomass plant burns organic material (wood, residues) to raise steam for a turbine. It sits in a monsoon warm-summer continental climate (Köppen Dwb) — Northern Hemisphere, latitude 47.7°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 157% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 99/100 — this site sits in the top third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a benign, low-corrosion environment (estimated ISO 9223 class C1 — Very low), with thermal cycling the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #834 largest biomass power plant of 981 in China by capacity.
China has 981 biomass power plants in this dataset, together about 30,108 MW of capacity.
Coordinates 47.7332, 128.9218 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Heilongjiang Yichun (Zhongke) power station is a 12 MW source-record biomass power plant in Heilongjiang Sheng, China.
Its output is enough to supply roughly 16,518 homes (estimated).
