Home / Asia / Japan / Hatanagi No.2

Hatanagi No.2

Hydro power plant in Shizuoka, Japan. Approximate location 35.3246, 138.1796.

HydroShizuokaJapanconventional storage

Hatanagi No.2 is a 86 MW hydro power plant in Shizuoka, Japan. It is operated by Chubu. Based on its capacity (estimated), it can supply roughly 86k homes (estimated). It ranks #263 of 692 Japan power plants by installed capacity. Commissioned in 1962, it is around 64 years old — an older, legacy facility. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 7.2% of Japan's electricity; the national grid averages 477 gCO₂/kWh (32.7% low-carbon) (2025).

86Source-backed capacity
86,098homes powered (est.)
1962commissioned (~64 yrs)

Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1020020.

Data status

Known data

FacilityHatanagi No.2 WRI
CountryJapan · Shizuoka WRI
Coordinates35.3246, 138.1796 WRI
FuelHydro WRI
MW installed capacity86 MW WRI source record; scope not independently normalised
OwnerChubu WRI
Commissioned1962 WRI
Technologyconventional storage WRI

Calculated from dataset

Capacity rank in country#263 of 692 calculated
Fuel-specific rank in country#42 of 55 calculated
Capacity vs country/fuel peers0.25× · 350 MW median · 55 peers calculated
Homes-powered equivalent86,098 calculated
Climate10.1°C · HDD 3,041 derived from coordinates
Environmental severityC3 · 33/100 derived from coordinates

Not available

GWh reported / yrNot available not in dataset
CO₂ emissionsnot applicable not applicable

Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.

Data provenance

The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.

capacity: GEM tracker 2026 operating-unit sum (location L100000602248); fuel: WRI source-record fuel

In context: how this plant compares

At 86 MW, Hatanagi No.2 is below the median hydro plant in Japan (350 MW). Technically it is described as conventional storage. Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.

Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.

Capacity vs largest hydro plants in Japan

Okutataragi: 1,932 MW2kOkutataragiOkumino: 1,500 MW2kOkuminoOkawachi: 1,280 MW1kOkawachiShin Takasegawa: 1,280 MW1kShin Takas…Okuyoshino: 1,206 MW1kOkuyoshinoMatanogawa: 1,200 MW1kMatanogawaOmarugawa: 1,200 MW1kOmarugawaTamahara: 1,200 MW1kTamahara

Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).

Owner

Operated by Chubu. All plants by this company →

Local climate & thermal context

This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a warm-summer humid continental climate (Köppen Dfb) — Northern Hemisphere, latitude 35.3°N — which shapes how much energy it can produce and how its output varies through the year.

10.1°Cannual mean temp
3,041heating degree-days (base 18°C)
167cooling degree-days (base 18°C)
1,134 melevation

Monthly mean temperature

J: 0 °CJF: 0 °CFM: 3 °CMA: 9 °CAM: 13 °CMJ: 16 °CJJ: 20 °CJA: 21 °CAS: 18 °CSO: 12 °CON: 7 °CND: 2 °CD21 °C

Heating degree-days here run 24% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.

Climate heat-demand index: 63/100 — this site sits in the mid third of the power plants we cover by heating degree-days.

Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.

Site climate & environmental severity

For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.

C3ISO 9223 corrosivity (indicative)
33/100environmental-severity index
21.7°Cseasonal temperature swing
64 kmdistance to coast

Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby plants

The #42 largest hydro power plant of 55 in Japan by capacity.

Japan has 55 hydro power plants in this dataset, together about 27,749 MW of capacity.

Nearby power plants

Location

Coordinates 35.3246, 138.1796 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.

Frequently asked questions

What type of power plant is Hatanagi No.2?

Hatanagi No.2 is a 86 MW source-record hydro power plant in Shizuoka, Japan, commissioned in 1962.

How many homes can Hatanagi No.2 power?

Its output is enough to supply roughly 86,098 homes (estimated).

Who operates Hatanagi No.2?

Hatanagi No.2 is operated by Chubu.

Built from open public data; no personal information. Operate this site? Request a correction or removal.