GOVE PENINSULA is a 120 MW oil power station in Northern Territory, Australia. Based on its capacity (estimated), it can supply roughly 90k homes (estimated). It ranks #155 of 536 Australia power plants by installed capacity. Its modelled annual emissions are 119,195 t CO₂/yr (Climate TRACE), equivalent to about 28k cars driven for a year. In context, oil supplies about 2.2% of Australia's electricity; the national grid averages 525 gCO₂/kWh (38.6% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id CT-6131.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: Climate TRACE source-record capacity (modelled/legacy); fuel: Climate TRACE source-record fuel
At 120 MW, GOVE PENINSULA is well above the median oil plant in Australia (9 MW). Oil-fired plants burn heavy fuel oil or diesel, usually as peaking or backup capacity on islands and grids without gas pipelines; high fuel cost keeps their utilisation low.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
This facility's annual emissions are roughly equivalent to:
Equivalencies via US EPA Greenhouse Gas Equivalencies; modelled emissions from Climate TRACE.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
This oil plant burns oil or diesel to drive turbines or reciprocating engines. It sits in a tropical savanna climate (Köppen Aw) — Southern Hemisphere, latitude 12.2°S — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in an extreme marine/tropical environment (estimated ISO 9223 class CX — Extreme), with marine salt corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #3 largest oil power plant of 46 in Australia by capacity.
Australia has 46 oil power plants in this dataset, together about 1,605 MW of capacity.
Coordinates -12.1889, 136.6868 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
GOVE PENINSULA is a 120 MW source-record oil power plant in Northern Territory, Australia.
Its output is enough to supply roughly 90,478 homes (estimated).
GOVE PENINSULA has modelled emissions of about 119,195 tonnes of CO₂ per year (Climate TRACE).
