Home / Oceania / Australia / Galilee Basin Power Project

Galilee Basin Power Project

Coal power plant in Queensland, Australia. Approximate location -21.149203, 144.799206.

CoalQueenslandAustralia

Galilee Basin Power Project is a 1,200 MW coal power station in Queensland, Australia. It is operated by to be determined [100%]. Based on its capacity (estimated), it can supply roughly 1.5 million homes (estimated). It ranks #14 of 536 Australia power plants by installed capacity. In context, coal supplies about 42.7% of Australia's electricity; the national grid averages 525 gCO₂/kWh (38.6% low-carbon) (2025).

1,200MW installed capacity
1,501,714homes powered (est.)

Plant data: WRI Global Power Plant Database (CC BY 4.0), id GEM_coa_galileebasin_austr.

Data status

Known data

FacilityGalilee Basin Power Project GEM-coal
CountryAustralia · Queensland GEM-coal
Coordinates-21.149203, 144.799206 GEM-coal
FuelCoal GEM-coal
MW installed capacity1,200 MW GEM GCPT; source record
Ownerto be determined [100%] GEM-coal

Calculated from dataset

CO₂ emissions5,256,000 t CO₂·a⁻¹ calculated
Capacity rank in country#14 / 536 calculated
Fuel-specific rank in country#13 / 38 calculated
Capacity vs country/fuel peers1.71× · 700 MW · n=38 calculated
Homes-powered equivalent1,501,714 calculated
Environmental severityC1 · 41/100 derived from coordinates

Not available

CommissionedNot available not in dataset
TechnologyNot available not in dataset
GWh reported / yrNot available not in dataset

Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.

Data provenance

The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.

capacity: GEM GCPT; fuel: GEM GCPT

In context: how this plant compares

At 1,200 MW, Galilee Basin Power Project is well above the median coal plant in Australia (700 MW). Coal plants burn pulverised coal to raise high-pressure steam for a turbine; they run as baseload but are the most carbon-intensive mainstream source and the first targeted for retirement or efficiency retrofits.

Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.

Capacity vs largest coal plants in Australia

Bayswater: 2,665 MW3kBayswaterLoy Yang A: 2,215 MW2kLoy Yang ALiddell: 2,051 MW2kLiddellKurri Kurri power station: 2,000 MW2kKurri Kurr…Gladstone: 1,680 MW2kGladstoneHazelwood: 1,600 MW2kHazelwoodYallourn: 1,480 MW1kYallournStanwell: 1,460 MW1kStanwell

Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).

Owner

Operated by to be determined [100%].

Climate zone & how it works

This coal plant burns coal to raise high-pressure steam that spins a turbine-generator. It sits in a hot semi-arid steppe climate (Köppen BSh) — Southern Hemisphere, latitude 21.1°S — which shapes how much energy it can produce and how its output varies through the year.

~23°Ctypical annual mean
~31°Ctypical warm-season mean
Hot semi-arid steppe: warm all year, with distinct wet and dry seasons

Climate zone & typical temperatures: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

Site climate & environmental severity

For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a benign, low-corrosion environment (estimated ISO 9223 class C1 — Very low), with dust abrasion the leading environmental stress.

C1ISO 9223 corrosivity (indicative)
41/100environmental-severity index
12.0°Cseasonal temperature swing
331 kmdistance to coast

Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby plants

The #13 largest coal power plant of 38 in Australia by capacity.

Australia has 38 coal power plants in this dataset, together about 32,918 MW of capacity.

Nearby power plants

Location

Coordinates -21.149203, 144.799206 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.

Frequently asked questions

What type of power plant is Galilee Basin Power Project?

Galilee Basin Power Project is a 1,200 MW coal power plant in Queensland, Australia.

How many homes can Galilee Basin Power Project power?

Its output is enough to supply roughly 1,501,714 homes (estimated).

Who operates Galilee Basin Power Project?

Galilee Basin Power Project is operated by to be determined [100%].

Built from open public data; no personal information. Operate this site? Request a correction or removal.