Hydro power plant in Bahia, Brazil. Approximate location -14.1833, -39.4667.
HydroBahiaBrazilunknown
Funil is a 30 MW hydro power plant in Bahia, Brazil. It is operated by Companhia Hidro Elétrica do São Francisco SA (CHESF) [100%]. Based on its capacity (estimated), it can supply roughly 30k homes (estimated). It ranks #656 of 2,572 Brazil power plants by installed capacity. Commissioned in 1970, it is around 56 years old — an older, legacy facility. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 51.8% of Brazil's electricity; the national grid averages 110 gCO₂/kWh (88.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id BRA0027046.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI Global Power Plant Database source-record (legacy); fuel: WRI source-record fuel
At 30 MW, Funil is well above the median hydro plant in Brazil (12 MW). Technically it is described as unknown. Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Companhia Hidro Elétrica do São Francisco SA (CHESF) [100%].
This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a tropical rainforest climate (Köppen Af) — Southern Hemisphere, latitude 14.2°S — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #164 largest hydro power plant of 701 in Brazil by capacity.
Brazil has 701 hydro power plants in this dataset, together about 105,987 MW of capacity.
Coordinates -14.1833, -39.4667 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Funil is a 30 MW source-record hydro power plant in Bahia, Brazil, commissioned in 1970.
Its output is enough to supply roughly 30,034 homes (estimated).
Funil is operated by Companhia Hidro Elétrica do São Francisco SA (CHESF) [100%].
