Ferrero cogeneration power station is a 50 MW gas power plant in Cuneo, Italy. It is operated by Ferrero SpA [100%]. Based on its capacity (estimated), it can supply roughly 56k homes (estimated). It ranks #211 of 489 Italy power plants by installed capacity. Commissioned in 2006, it is around 20 years old — relatively modern. Its annual emissions of 209,288 t CO₂/yr (EU ETS verified (EUTL 2023)) are equivalent to about 49k cars driven for a year. In context, gas supplies about 47.2% of Italy's electricity; the national grid averages 285 gCO₂/kWh (48.8% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GOGPT_ferrero_italy.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM · 2026 · L100000400337; fuel: GEM GOGPT
At 50 MW, Ferrero cogeneration power station is below the median gas plant in Italy (324 MW). Technically it is described as CCGT; combined-cycle with a heat-recovery steam generator (HRSG). Gas plants burn natural gas either in open-cycle turbines for fast peaking, or in combined-cycle units that recover exhaust heat in an HRSG to reach roughly 55–62% efficiency — the cleanest-burning fossil option.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
This facility's annual emissions are roughly equivalent to:
Equivalencies via US EPA Greenhouse Gas Equivalencies; emissions per EU ETS verified (EUTL 2023) (measured for US EPA/EU ETS, modelled for Climate TRACE).
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Ferrero SpA [100%].
This gas plant burns natural gas in a turbine — often in a combined-cycle setup — to generate electricity. It sits in a temperate oceanic climate (Köppen Cfb) — Northern Hemisphere, latitude 44.7°N — which shapes how much energy it can produce and how its output varies through the year.
Climate zone & typical temperatures: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #105 largest gas power plant of 118 in Italy by capacity.
Italy has 118 gas power plants in this dataset, together about 53,570 MW of capacity.
Coordinates 44.703, 8.027 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Ferrero cogeneration power station is a 50 MW gas power plant in Cuneo, Italy, commissioned in 2006.
Its output is enough to supply roughly 56,314 homes (estimated).
Ferrero cogeneration power station is operated by Ferrero SpA [100%].
Ferrero cogeneration power station has measured emissions of about 209,288 tonnes of CO₂ per year (EU ETS verified (EUTL 2023)).
