Fangda Special Steel power project is a 130 MW gas power station in Jiangxi, China. It is operated by Fangda Special Steel Technology Co Ltd. Based on its capacity (estimated), it can supply roughly 146k homes (estimated). It ranks #2402 of 6,685 China power plants by installed capacity. Commissioned in 2025, it is around 1 years old — recently built. In context, gas supplies about 3.2% of China's electricity; the national grid averages 525 gCO₂/kWh (41.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id GOGPT_fangdaspecialsteel_china.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The public capacity above is the current source-record value. A 2026 tracker candidate lists 65 MW for Fangda Special Steel power project, but it is not used as the public primary value until scope is verified (unit vs operating vs installed/project total).
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: GEM GOGPT; fuel: GEM GOGPT
At 130 MW, Fangda Special Steel power project is below the median gas plant in China (283.5 MW). Technically it is described as Steam. Gas plants burn natural gas either in open-cycle turbines for fast peaking, or in combined-cycle units that recover exhaust heat in an HRSG to reach roughly 55–62% efficiency — the cleanest-burning fossil option.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Fangda Special Steel Technology Co Ltd.
This gas plant burns natural gas in a turbine — often in a combined-cycle setup — to generate electricity. It sits in a humid subtropical climate (Köppen Cfa) — Northern Hemisphere, latitude 28.7°N — which shapes how much energy it can produce and how its output varies through the year.
Climate zone & typical temperatures: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #420 largest gas power plant of 595 in China by capacity.
China has 595 gas power plants in this dataset, together about 333,508 MW of capacity.
Coordinates 28.65016761, 115.986723 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Fangda Special Steel power project is a 130 MW gas power plant in Jiangxi, China, commissioned in 2025.
Its output is enough to supply roughly 146,417 homes (estimated).
Fangda Special Steel power project is operated by Fangda Special Steel Technology Co Ltd.
