Hydro power plant in British Columbia, Canada. Approximate location 53.9835, -129.7342.
HydroBritish ColumbiaCanada
Falls River is a 7 MW hydro power plant in British Columbia, Canada. It is operated by BC Hydro. Based on its capacity (estimated), it can supply roughly 7.0k homes (estimated). It ranks #893 of 1,211 Canada power plants by installed capacity. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 52.8% of Canada's electricity; the national grid averages 191 gCO₂/kWh (77.0% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id CAN0007852.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI Global Power Plant Database source-record (legacy); fuel: WRI source-record fuel
At 7 MW, Falls River is below the median hydro plant in Canada (12 MW). Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by BC Hydro. All plants by this company →
This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a subpolar oceanic climate (Köppen Cfc) — Northern Hemisphere, latitude 54.0°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 94% above the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 93/100 — this site sits in the top third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #365 largest hydro power plant of 556 in Canada by capacity.
Canada has 556 hydro power plants in this dataset, together about 81,037 MW of capacity.
Coordinates 53.9835, -129.7342 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Falls River is a 7 MW source-record hydro power plant in British Columbia, Canada.
Its output is enough to supply roughly 7,008 homes (estimated).
Falls River is operated by BC Hydro.
