Hydro power plant in Lima, Peru. Approximate location -12.8374, -75.9774.
HydroLimaPeruconventional storage
El Platanal is a 220 MW hydro power station in Lima, Peru. It is operated by Compañia Eléctrica El Platanal S.A. Based on reported annual generation of 1,172 GWh, it can supply roughly 335k homes. It ranks #12 of 40 Peru power plants by installed capacity. Commissioned in 2010, it is around 16 years old — relatively modern. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 56.1% of Peru's electricity; the national grid averages 238 gCO₂/kWh (63.6% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1022072.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000603094); fuel: WRI source-record fuel
At 220 MW, El Platanal is well above the median hydro plant in Peru (152 MW). Technically it is described as conventional storage. Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Compañia Eléctrica El Platanal S.A.
This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a polar tundra climate (Köppen ET) — Southern Hemisphere, latitude 12.8°S — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 20% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 42/100 — this site sits in the mid third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with heat / UV the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #4 largest hydro power plant of 14 in Peru by capacity.
Peru has 14 hydro power plants in this dataset, together about 2,748 MW of capacity.
Coordinates -12.8374, -75.9774 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
El Platanal is a 220 MW source-record hydro power plant in Lima, Peru, commissioned in 2010.
El Platanal generates about 1,172 GWh of electricity per year.
Its output is enough to supply roughly 334,857 homes.
El Platanal is operated by Compañia Eléctrica El Platanal S.A.
