DNYANESHWAR MILL is a 13 MW biomass power plant in Maharashtra, India. It is operated by Shri Ssk ltd. Based on its capacity (estimated), it can supply roughly 18k homes (estimated). It ranks #1753 of 2,229 India power plants by installed capacity. In context, biomass supplies about 1.1% of India's electricity; the national grid averages 670 gCO₂/kWh (26.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1019952.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI Global Power Plant Database source-record (legacy); fuel: WRI source-record fuel
At 13 MW, DNYANESHWAR MILL is below the median biomass plant in India (18 MW). Biomass plants burn organic material such as wood, residues or waste-derived fuel to raise steam; they are dispatchable and counted as low-carbon where the feedstock is sustainably sourced.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Shri Ssk ltd.
This biomass plant burns organic material (wood, residues) to raise steam for a turbine. It sits in a hot semi-arid steppe climate (Köppen BSh) — Northern Hemisphere, latitude 19.4°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a benign, low-corrosion environment (estimated ISO 9223 class C1 — Very low), with dust abrasion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #107 largest biomass power plant of 152 in India by capacity.
India has 152 biomass power plants in this dataset, together about 3,072 MW of capacity.
Coordinates 19.4496, 75.0382 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
DNYANESHWAR MILL is a 13 MW source-record biomass power plant in Maharashtra, India.
Its output is enough to supply roughly 17,895 homes (estimated).
DNYANESHWAR MILL is operated by Shri Ssk ltd.
