Crowlands Wind Farm is a 80 MW wind power plant in Victoria, Australia. It is operated by Pacific Hydro. Based on reported annual generation of 36 GWh, it can supply roughly 10k homes. It ranks #212 of 536 Australia power plants by installed capacity. Commissioned in 2020, it is around 6 years old — recently built. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, wind supplies about 13.7% of Australia's electricity; the national grid averages 525 gCO₂/kWh (38.6% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id AUS0000518.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000906137); fuel: WRI source-record fuel
At 80 MW, Crowlands Wind Farm is well above the median wind plant in Australia (66 MW). Technically it is described as Onshore. Wind turbines convert moving air into electricity; output is variable and site-dependent, and modern turbines deliver some of the lowest-cost new generation on many grids.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Pacific Hydro. All plants by this company →
This wind plant converts the kinetic energy of wind into electricity through turbine rotors. It sits in a temperate oceanic climate (Köppen Cfb) — Southern Hemisphere, latitude 37.1°S — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 10% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 46/100 — this site sits in the mid third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #27 largest wind power plant of 65 in Australia by capacity.
Australia has 65 wind power plants in this dataset, together about 5,786 MW of capacity.
Coordinates -37.1216, 143.1537 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Crowlands Wind Farm is a 80 MW source-record wind power plant in Victoria, Australia, commissioned in 2020.
Crowlands Wind Farm generates about 36 GWh of electricity per year.
Its output is enough to supply roughly 10,257 homes.
Crowlands Wind Farm is operated by Pacific Hydro.
