Wind power plant in Alberta, Canada. Approximate location 49.6922, -112.351.
WindAlbertaCanadaOnshore
Chin Chute is a 30 MW wind power plant in Alberta, Canada. It is operated by Suncor / EHN/ Enbridge. Based on its capacity (estimated), it can supply roughly 26k homes (estimated). It ranks #486 of 1,211 Canada power plants by installed capacity. Commissioned in 2006, it is around 20 years old — relatively modern. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, wind supplies about 7.9% of Canada's electricity; the national grid averages 191 gCO₂/kWh (77.0% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id CAN0007754.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000906544); fuel: WRI source-record fuel
At 30 MW, Chin Chute is well above the median wind plant in Canada (24 MW). Technically it is described as Onshore. Wind turbines convert moving air into electricity; output is variable and site-dependent, and modern turbines deliver some of the lowest-cost new generation on many grids.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Suncor / EHN/ Enbridge.
This wind plant converts the kinetic energy of wind into electricity through turbine rotors. It sits in a cold semi-arid steppe climate (Köppen BSk) — Northern Hemisphere, latitude 49.7°N — which shapes how much energy it can produce and how its output varies through the year.
Climate zone & typical temperatures: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a benign, low-corrosion environment (estimated ISO 9223 class C1 — Very low), with dust abrasion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #104 largest wind power plant of 241 in Canada by capacity.
Canada has 241 wind power plants in this dataset, together about 12,127 MW of capacity.
Coordinates 49.6922, -112.351 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Chin Chute is a 30 MW source-record wind power plant in Alberta, Canada, commissioned in 2006.
Its output is enough to supply roughly 25,529 homes (estimated).
Chin Chute is operated by Suncor / EHN/ Enbridge.
