Home / Oceania / Australia / Brown Mountain

Brown Mountain — Australia

Hydro power plant in New South Wales, Australia. Approximate location -36.5951, 149.474.

HydroNew South WalesAustralia

Brown Mountain is a 5 MW hydro power plant in New South Wales, Australia. It is operated by Eraring Energy. Based on reported annual generation of 2 GWh, it can supply roughly 542 homes. It ranks #431 of 536 Australia power plants by installed capacity. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 4.3% of Australia's electricity; the national grid averages 525 gCO₂/kWh (38.6% low-carbon) (2025).

5MW installed capacity
2GWh reported / yr
542homes powered

Plant data: WRI Global Power Plant Database (CC BY 4.0), id AUS0000269.

Data status

Known data

FacilityBrown Mountain WRI
CountryAustralia · New South Wales WRI
Coordinates-36.5951, 149.474 WRI
FuelHydro WRI
MW installed capacity5 MW WRI GPPD; source record
OwnerEraring Energy WRI
GWh reported / yr2 GWh·a⁻¹ WRI

Calculated from dataset

Capacity rank in country#431 / 536 calculated
Fuel-specific rank in country#62 / 73 calculated
Capacity vs country/fuel peers0.11× · 45 MW · n=73 calculated
Homes-powered equivalent542 calculated from reported generation
Climate13.6°C · HDD 1,664 derived from coordinates
Environmental severityC3 · 32/100 derived from coordinates

Not available

CommissionedNot available not in dataset
TechnologyNot available not in dataset
CO₂ emissionsnot applicable not applicable

Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.

Data provenance

Capacity and fuel are the upstream open-dataset record, not yet matched to a 2026 registry or GEM entry.

capacity: WRI GPPD; fuel: WRI GPPD

In context: how this plant compares

At 5 MW, Brown Mountain is below the median hydro plant in Australia (45 MW). Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.

Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.

Key facts

Load factor
4%, from 2 GWh of reported generation; the median for 50 hydro plants in Australia that report generation is 35%
Share of Australia hydro capacity
less than 0.1% of 8,878 MW across 73 plants in this dataset

Calculated from the capacity and generation records in this dataset (WRI Global Power Plant Database (CC BY 4.0)).

Reported generation trend

2013: 10 GWh20132014: 2 GWh201410 GWh

Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).

Owner

Operated by Eraring Energy.

Local climate & thermal context

This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a temperate oceanic climate (Köppen Cfb) — Southern Hemisphere, latitude 36.6°S — which shapes how much energy it can produce and how its output varies through the year.

13.6°Cannual mean temp
1,664heating degree-days (base 18°C)
48cooling degree-days (base 18°C)
399 melevation

Monthly mean temperature

J: 19 °CJF: 19 °CFM: 17 °CMA: 14 °CAM: 12 °CMJ: 9 °CJJ: 8 °CJA: 9 °CAS: 11 °CSO: 13 °CON: 15 °CND: 17 °CD19 °C

Heating degree-days here run 32% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.

Climate heat-demand index: 37/100 — this site sits in the mid third of the power plants we cover by heating degree-days.

Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.

Site climate & environmental severity

This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.

C3ISO 9223 corrosivity (indicative)
32/100environmental-severity index
10.9°Cseasonal temperature swing
71 kmdistance to coast

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby plants

The #62 largest hydro power plant of 73 in Australia by capacity.

Australia has 73 hydro power plants in this dataset, together about 8,878 MW of capacity.

Nearby power plants

Location

Coordinates -36.5951, 149.474 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.

Frequently asked questions

What type of power plant is Brown Mountain?

Brown Mountain is a 5 MW hydro power plant in New South Wales, Australia.

How much electricity does Brown Mountain generate?

Brown Mountain generates about 2 GWh of electricity per year.

Who operates Brown Mountain?

Brown Mountain is operated by Eraring Energy.

Built from open public data; no personal information. Operate this site? Request a correction or removal.