Bremer Bay Diesel Backup is a 1 MW oil power plant in Western Australia, Australia. It is operated by Verve Energy. Based on its capacity (estimated), it can supply roughly 976 homes (estimated). It ranks #503 of 536 Australia power plants by installed capacity. In context, oil supplies about 2.2% of Australia's electricity; the national grid averages 525 gCO₂/kWh (38.6% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id AUS0000349.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and fuel fields on this page are source-record values from the upstream open dataset. They are useful for identification and ranking, but they have not been upgraded to a 2026 registry/GEM-location verified value.
capacity: WRI Global Power Plant Database source-record (legacy); fuel: WRI source-record fuel
At 1 MW, Bremer Bay Diesel Backup is below the median oil plant in Australia (9 MW). Oil-fired plants burn heavy fuel oil or diesel, usually as peaking or backup capacity on islands and grids without gas pipelines; high fuel cost keeps their utilisation low.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Verve Energy. All plants by this company →
This oil plant burns oil or diesel to drive turbines or reciprocating engines. It sits in a warm-summer Mediterranean climate (Köppen Csb) — Southern Hemisphere, latitude 34.4°S — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 63% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 25/100 — this site sits in the bottom third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with marine corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #35 largest oil power plant of 46 in Australia by capacity.
Australia has 46 oil power plants in this dataset, together about 1,605 MW of capacity.
Coordinates -34.4018, 119.3888 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Bremer Bay Diesel Backup is a 1 MW source-record oil power plant in Western Australia, Australia.
Its output is enough to supply roughly 976 homes (estimated).
Bremer Bay Diesel Backup is operated by Verve Energy.
