Bannari Amman Spinning Mills Wind Power Project is a 11 MW wind power plant in Tamil Nadu, India. It is operated by Enercon India Ltd.. Based on its capacity (estimated), it can supply roughly 9.5k homes (estimated). It ranks #1795 of 2,229 India power plants by installed capacity. Commissioned in 2006, it is around 20 years old — relatively modern. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, wind supplies about 5.0% of India's electricity; the national grid averages 670 gCO₂/kWh (26.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1026655.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000917033); fuel: WRI source-record fuel
At 11 MW, Bannari Amman Spinning Mills Wind Power Project is below the median wind plant in India (24 MW). Technically it is described as Onshore. Wind turbines convert moving air into electricity; output is variable and site-dependent, and modern turbines deliver some of the lowest-cost new generation on many grids.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Enercon India Ltd..
This wind plant converts the kinetic energy of wind into electricity through turbine rotors. It sits in a tropical savanna climate (Köppen Aw) — Northern Hemisphere, latitude 10.7°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a corrosive environment (estimated ISO 9223 class C4 — High), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #77 largest wind power plant of 108 in India by capacity.
India has 108 wind power plants in this dataset, together about 3,647 MW of capacity.
Coordinates 10.7474, 77.4194 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Bannari Amman Spinning Mills Wind Power Project is a 11 MW source-record wind power plant in Tamil Nadu, India, commissioned in 2006.
Its output is enough to supply roughly 9,530 homes (estimated).
Bannari Amman Spinning Mills Wind Power Project is operated by Enercon India Ltd..
