Home / Oceania / Australia / Banimboola

Banimboola — Australia

Hydro power plant in Victoria, Australia. Approximate location -36.5344, 147.4594.

HydroVictoriaAustralia

Banimboola is a 12.2 MW hydro power plant in Victoria, Australia. It is operated by AGL Energy Pty Ltd. Based on reported annual generation of 3 GWh, it can supply roughly 885 homes. It ranks #380 of 536 Australia power plants by installed capacity. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 4.3% of Australia's electricity; the national grid averages 525 gCO₂/kWh (38.6% low-carbon) (2025).

12.2MW installed capacity
3GWh reported / yr
885homes powered

Plant data: WRI Global Power Plant Database (CC BY 4.0), id AUS0000014.

Data status

Known data

FacilityBanimboola WRI
CountryAustralia · Victoria WRI
Coordinates-36.5344, 147.4594 WRI
FuelHydro WRI
MW installed capacity12.2 MW Wikidata P2109; installed/nameplate capacity
Verification noteQuality label backfilled from existing source-backed capacity provenance on 2026-07-05; capacity value was not changed. source-verified
OwnerAGL Energy Pty Ltd WRI
GWh reported / yr3 GWh·a⁻¹ WRI

Calculated from dataset

Capacity rank in country#380 / 536 calculated
Fuel-specific rank in country#54 / 73 calculated
Capacity vs country/fuel peers0.27× · 45 MW · n=73 calculated
Homes-powered equivalent885 calculated from reported generation
Climate11.7°C · HDD 2,354 derived from coordinates
Environmental severityC2 · 27/100 derived from coordinates

Not available

CommissionedNot available not in dataset
TechnologyNot available not in dataset
CO₂ emissionsnot applicable not applicable

Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.

Data provenance

Source of the capacity and fuel values:

capacity: Wikidata P2109; fuel: WRI GPPD

In context: how this plant compares

At 12.2 MW, Banimboola is below the median hydro plant in Australia (45 MW). Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.

Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.

Key facts

Load factor
3%, from 3 GWh of reported generation; the median for 50 hydro plants in Australia that report generation is 35%
Generation trend
12 GWh in 2013 and 3 GWh in 2018 (−73%)
Highest and lowest year
2016: 47 GWh; 2017: 3 GWh
Share of Australia hydro capacity
0.1% of 8,878 MW across 73 plants in this dataset

Calculated from the capacity and generation records in this dataset (WRI Global Power Plant Database (CC BY 4.0)).

Reported generation trend

2013: 12 GWh20132014: 26 GWh20142015: 38 GWh20152016: 47 GWh20162017: 3 GWh20172018: 3 GWh201847 GWh

Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).

Local climate & thermal context

This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a temperate oceanic climate (Köppen Cfb) — Southern Hemisphere, latitude 36.5°S — which shapes how much energy it can produce and how its output varies through the year.

11.7°Cannual mean temp
2,354heating degree-days (base 18°C)
23cooling degree-days (base 18°C)
682 melevation

Monthly mean temperature

J: 18 °CJF: 19 °CFM: 16 °CMA: 12 °CAM: 9 °CMJ: 6 °CJJ: 5 °CJA: 6 °CAS: 8 °CSO: 11 °CON: 14 °CND: 16 °CD19 °C

Heating degree-days here run 4% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.

Climate heat-demand index: 48/100 — this site sits in the mid third of the power plants we cover by heating degree-days.

Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.

Site climate & environmental severity

This site sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with humidity / wetness the leading environmental stress.

C2ISO 9223 corrosivity (indicative)
27/100environmental-severity index
13.6°Cseasonal temperature swing
152 kmdistance to coast

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby plants

The #54 largest hydro power plant of 73 in Australia by capacity.

Australia has 73 hydro power plants in this dataset, together about 8,878 MW of capacity.

Nearby power plants

Location

Coordinates -36.5344, 147.4594 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.

Frequently asked questions

What type of power plant is Banimboola?

Banimboola is a 12.2 MW hydro power plant in Victoria, Australia.

How much electricity does Banimboola generate?

Banimboola generates about 3 GWh of electricity per year.

Who operates Banimboola?

Banimboola is operated by AGL Energy Pty Ltd.

Built from open public data; no personal information. Operate this site? Request a correction or removal.