Coal power plant in Northern Mindanao, Philippines. Approximate location 8.7662, 124.7685.
CoalNorthern MindanaoPhilippinessubcritical
Balingasag power station is a 165 MW coal power station in Northern Mindanao, Philippines. It is operated by Minergy Coal Corporation. Based on its capacity (estimated), it can supply roughly 206k homes (estimated). It ranks #75 of 186 Philippines power plants by installed capacity. Commissioned in 2017, it is around 9 years old — relatively modern. In context, coal supplies about 58.7% of Philippines's electricity; the national grid averages 588 gCO₂/kWh (23.3% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1030489.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000103192); fuel: WRI source-record fuel
At 165 MW, Balingasag power station is below the median coal plant in Philippines (300 MW). Technically it is described as subcritical. Coal plants burn pulverised coal to raise high-pressure steam for a turbine; they run as baseload but are the most carbon-intensive mainstream source and the first targeted for retirement or efficiency retrofits.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Minergy Coal Corporation.
This coal plant burns coal to raise high-pressure steam that spins a turbine-generator. It sits in a tropical rainforest climate (Köppen Af) — Northern Hemisphere, latitude 8.8°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in an extreme marine/tropical environment (estimated ISO 9223 class CX — Extreme), with marine salt corrosion the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #32 largest coal power plant of 50 in Philippines by capacity.
Philippines has 50 coal power plants in this dataset, together about 18,322 MW of capacity.
Coordinates 8.7662, 124.7685 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Balingasag power station is a 165 MW source-record coal power plant in Northern Mindanao, Philippines, commissioned in 2017.
Its output is enough to supply roughly 206,485 homes (estimated).
Balingasag power station is operated by Minergy Coal Corporation.
