Hydro power plant in Amazonas, Brazil. Approximate location -1.9158, -59.4733.
HydroAmazonasBrazilconventional storage
Balbina is a 250 MW hydro power station in Amazonas, Brazil. It is operated by Eletrobras Eletronorte [100%]. Based on its capacity (estimated), it can supply roughly 250k homes (estimated). It ranks #171 of 2,572 Brazil power plants by installed capacity. Commissioned in 1989, it is around 37 years old — long-established. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 51.8% of Brazil's electricity; the national grid averages 110 gCO₂/kWh (88.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id BRA0000190.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000600215); fuel: WRI source-record fuel
At 250 MW, Balbina is well above the median hydro plant in Brazil (12 MW). Technically it is described as conventional storage. Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Eletrobras Eletronorte [100%].
This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a tropical rainforest climate (Köppen Af) — Southern Hemisphere, latitude 1.9°S — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
This site has effectively no heating season (tropical/equatorial climate), so winter heat loss is not the driver here. The thermal concern shifts to year-round process heat and humidity/heat-driven corrosion of hot equipment.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #67 largest hydro power plant of 701 in Brazil by capacity.
Brazil has 701 hydro power plants in this dataset, together about 105,987 MW of capacity.
Coordinates -1.9158, -59.4733 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Balbina is a 250 MW source-record hydro power plant in Amazonas, Brazil, commissioned in 1989.
Its output is enough to supply roughly 250,085 homes (estimated).
Balbina is operated by Eletrobras Eletronorte [100%].
