ANUPUR TPP is a 1,260 MW coal power station in Madhya Pradesh, India. Based on reported annual generation of 6,242 GWh, it can supply roughly 1.8 million homes. It ranks #313 of 2,229 India power plants by installed capacity. Commissioned in 2015, it is around 11 years old — relatively modern. In context, coal supplies about 70.8% of India's electricity; the national grid averages 670 gCO₂/kWh (26.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id IND0000015.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 operating-unit sum (location L100000102318); fuel: WRI source-record fuel
At 1,260 MW, ANUPUR TPP is well above the median coal plant in India (1,000 MW). Coal plants burn pulverised coal to raise high-pressure steam for a turbine; they run as baseload but are the most carbon-intensive mainstream source and the first targeted for retirement or efficiency retrofits.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Annual generation (GWh), WRI Global Power Plant Database (CC BY 4.0).
This coal plant burns coal to raise high-pressure steam that spins a turbine-generator. It sits in a humid subtropical (dry winter) climate (Köppen Cwa) — Northern Hemisphere, latitude 23.1°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 99% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 13/100 — this site sits in the bottom third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #293 largest coal power plant of 716 in India by capacity.
India has 716 coal power plants in this dataset, together about 806,969 MW of capacity.
Coordinates 23.0655, 81.7865 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
ANUPUR TPP is a 1,260 MW source-record coal power plant in Madhya Pradesh, India, commissioned in 2015.
ANUPUR TPP generates about 6,242 GWh of electricity per year.
Its output is enough to supply roughly 1,783,371 homes.
