Ansha Dam is a 128 MW hydro power station in Fujian, China. It is operated by Huadian Fuxin Energy Corporation Limited. Based on its capacity (estimated), it can supply roughly 128k homes (estimated). It ranks #2414 of 6,685 China power plants by installed capacity. Commissioned in 1975, it is around 51 years old — an older, legacy facility. As a non-combustion source, it has no direct CO₂ emissions from generation. In context, hydro supplies about 13.2% of China's electricity; the national grid averages 525 gCO₂/kWh (41.7% low-carbon) (2025).
Plant data: WRI Global Power Plant Database (CC BY 4.0), id WRI1070888.
Known, modelled and calculated values are kept separate. Missing fields are shown as unavailable.
The public capacity above is a source-verified 2026 capacity claim: 128 MW for Ansha hydroelectric plant.
Source: GEM tracker raw 2026. Scope: operating/nameplate; source-backed GEM tracker 2026 plant record. Confidence: high_source_row_verified.
The capacity and/or fuel fields on this page include a source-backed provenance label from GEM, an official registry, Wikidata, OSM, or a cross-source match.
capacity: GEM tracker 2026 (location L100000600591); fuel: WRI source-record fuel
At 128 MW, Ansha Dam is well above the median hydro plant in China (24 MW). Technically it is described as conventional storage. Hydropower converts the energy of falling or flowing water into electricity; output depends on rainfall and reservoir level, and large dams also provide grid balancing and storage.
Capacity comparison computed from the WRI Global Power Plant Database; fuel-type context is general engineering background.
Installed capacity (MW), WRI Global Power Plant Database (CC BY 4.0).
Operated by Huadian Fuxin Energy Corporation Limited.
This hydro plant converts the energy of falling or flowing water through hydro turbines. It sits in a humid subtropical climate (Köppen Cfa) — Northern Hemisphere, latitude 26.0°N — which shapes how much energy it can produce and how its output varies through the year.
Monthly mean temperature
Heating degree-days here run 63% below the median power plant in this dataset — a proxy for how much extra energy heated equipment must replace through its surfaces in winter.
Climate heat-demand index: 25/100 — this site sits in the bottom third of the power plants we cover by heating degree-days.
Climate normals: WorldClim 2.1 (1970–2000 monthly normals, 10 arc-min, CC BY 4.0); zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid). Degree-days & heat-demand index computed by PowerAtlas — a modelled heat-demand proxy, not a measured site figure.
For a plant’s outdoor hardware — heat-recovery steam generators (HRSG), expansion joints, valves, flanges and their insulation — the local climate sets how fast unprotected steel and coatings degrade. This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #241 largest hydro power plant of 947 in China by capacity.
China has 947 hydro power plants in this dataset, together about 262,337 MW of capacity.
Coordinates 26.0279, 117.1125 from WRI Global Power Plant Database (CC BY 4.0). View on OpenStreetMap.
Ansha Dam is a 128 MW source-record hydro power plant in Fujian, China, commissioned in 1975.
Its output is enough to supply roughly 128,146 homes (estimated).
Ansha Dam is operated by Huadian Fuxin Energy Corporation Limited.
