Askar aluminium plant

Askar aluminium plant is an aluminium smelter in Bahrain with a reported capacity of 1,650,000 t of alumina/aluminum. It smelts alumina into primary aluminium by high-current electrolysis. It is operated by Aluminium Bahrain BSC. It emits about 3,506,478 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 817,361 cars.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3672952.

在上下文中：该设施如何比较

在1,650,000 t of alumina/aluminum时，Askar aluminium plant是Bahrain中aluminium smelter的中位数约 1,650,000 t of alumina/aluminum。 子部门：aluminum。 作为aluminium smelter，它需要强烈的工艺热量（通常600–900°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 铝冶炼厂使用大电流将氧化铝精炼成900°C以上的熔融铝，热金属必须通过坩埚和铸造设备流动。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 3,506,478 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Operator

Operated by Aluminium Bahrain BSC. All facilities by this operator →

Local climate

Askar aluminium plant sits in a hot desert climate zone (Köppen BWh), at 26.1°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

Nearby industrial sites

• Bahrain Petroleum Company Refinery · Refinery · 4,006,005 t CO₂
• Askar Cement Plant · Cement Plant · 340,384 t CO₂
• Sulb Bahrain Al Hidd steel plant · Steel Plant · 1,194,208 t CO₂
• Al Ittefaq National Steel Dammam plant · Steel Plant · 423,032 t CO₂
• Al Qaryan steel plant · Steel Plant · 910,474 t CO₂
• Al Ittefaq Arab Steel Dammam plant · Steel Plant · 1,306,009 t CO₂

Location

Coordinates 26.08781, 50.60294. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions