Home / Asia / China / Steel plants / Xinjiang Kunyu Iron and Steel Co Ltd

Xinjiang Kunyu Iron and Steel Co Ltd

Steel Plant in China. Approximate location 44.40321, 84.96468.

Steel PlantChinaCO₂ estimate (modelled)

Xinjiang Kunyu Iron and Steel Co Ltd is a steel plant in China. Steel plants burn coal in blast furnaces or use electric arcs to melt scrap; in both cases the molten metal must be kept above 1,500°C and transferred through extensive hot piping and vessels. It is operated by Xinjiang Kunyu Lron & Steel Co Ltd. It emits about 1,130,658 t CO₂e a year from Climate TRACE, roughly comparable to the annual emissions of 264k passenger cars.

1,130,658t CO₂e / yr (Climate TRACE)
#514CO₂ rank in China

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1566665.

Data status

Known source data

FacilityXinjiang Kunyu Iron and Steel Co Ltd Climate TRACE
CountryChina Climate TRACE
Coordinates44.40321, 84.96468 Climate TRACE
Sector / subsectoriron-and-steel Climate TRACE
Owner / operatorXinjiang Kunyu Lron & Steel Co Ltd Climate TRACE
GEM steel parentShiheng Special Steel Holding Group Co Ltd [54.7%]; Hong Kong Wing Tai Holdings [22.0%]; other [15.9%]; Trade Union Committee of Shiheng Special Steel Group [7.4%] Global Energy Monitor
Steel process routeironmaking BF Global Energy Monitor
Steel asset statusoperating Global Energy Monitor
Steel equipmentBF Global Energy Monitor
Modelled CO₂e1,130,658 t/yr Climate TRACE

Calculated from the dataset

China rank#514 of 1485 · top 34.6% calculated
Global iron-and-steel rank#378 of 868 · top 43.5% calculated
Climate contextderived from coordinates calculated

Not available

Fuel typeNot available not in dataset
Thermal capacity (MW)Not available not in dataset

Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.

Similar facilities by modelled emissions

Same Climate TRACE subsector; closest non-placeholder modelled CO₂e values. Russia and Belarus excluded.

Operating power plants within 50 km

PowerAtlas operating assets, ordered by great-circle distance from published coordinates.

In context: how this facility compares

Subsector: iron-and-steel. As steel plant, it requires high process heat (typically 800–1500°C) for its core industrial operations — heat that must be supplied by boilers, furnaces or direct combustion, and losses through uninsulated vessels and piping represent wasted fuel. Removable modular insulation can cut those losses by 80–96%, surface-cooling equipment to ≤45°C, with payback often under 2 years. Steel plants burn coal in blast furnaces or use electric arcs to melt scrap; in both cases the molten metal must be kept above 1,500°C and transferred through extensive hot piping and vessels.

Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.

What 1,130,658 t CO₂e a year looks like

This facility's estimated annual CO₂e (Climate TRACE, modelled) in everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

264kcars driven for a year
147khomes' annual energy use
19 milliontree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Carbon cost, Scope 1 & decarbonization potential

At its reported 1.1M t CO₂e/yr (Scope 1), Xinjiang Kunyu Iron and Steel Co Ltd carries no domestic carbon price — and as a CBAM-covered product, its 1.1M t at the EU CBAM rate (€75/t) is €85.2M/yr of exposure on EU-bound exports. CBAM share rises from 2.5% (2026) to 100% by 2034. The fastest decarbonization lever is energy efficiency: eliminating heat loss on hot equipment (removable insulation, steam & waste-heat recovery) typically cuts 2–5% of fuel-related CO₂ — here ≈23k t–57k t/yr, worth €1.7M€4.3M, with payback up to 2 years. No domestic carbon price — but cement, steel, aluminium, fertilizer and hydrogen exported to the EU face CBAM at €75/t (rising to 100% by 2034).

1.1M t CO₂e / yrScope 1 emissions
€85.2M/yrCBAM exposure on EU exports
23k t–57k t/yr ≈ €1.7M€4.3MDecarbonization potential

Carbon price: EU CBAM €75/t · EU ETS €79/t, July 2, 2026, refreshed live via Carbon Hub. CO₂: Climate TRACE. Efficiency range: US DOE / ASTM C680 (method). Indicative carbon value, not the cash bill — free allocation applies; not compliance advice. Estimate the saving for this site →

Operator

Operated by Xinjiang Kunyu Lron & Steel Co Ltd.

Local climate

Xinjiang Kunyu Iron and Steel Co Ltd sits in a cold desert climate zone (Köppen BWk), at 44.4°N in the northern hemisphere.

~11°Ctypical annual mean
~26°Ctypical warm-season
Cold desert: four distinct seasons — cold winters and warm summers

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

Site climate & environmental severity

The local climate sets how fast unprotected steel, protective coatings and the insulation on hot process equipment degrade at this site. It sits in a benign, low-corrosion environment (estimated ISO 9223 class C1 — Very low), with thermal cycling the leading environmental stress.

C1ISO 9223 corrosivity (indicative)
42/100environmental-severity index
39.6°Cseasonal temperature swing
9999 kmdistance to coast
LowCUI risk tier

In this site’s local climate, a bare 150 °C surface sheds about 1434 W/m² to ambient — roughly 1.10× the loss at a 20 °C reference; removable insulation recovers about 1362 W/m² of that. Reference-surface calculation at a 150 °C surface from WorldClim climate normals (ASTM C680 / ISO 12241) — an indicative per-climate comparison, not a measurement of this site’s specific equipment. Open method dataset: DOI 10.5281/zenodo.20787408 (CC BY 4.0).

Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby sites

Nearby industrial sites

Location

Coordinates 44.40321, 84.96468. View on OpenStreetMap.

Heat loss & insulation profile

For a steel plant, the main modular-insulation targets are reheat & annealing furnaces, ladles, hot-blast stoves, steam & gas ducting. Typical hot-surface ranges used for screening: 200–1,200 °C.

Indicative recoverable energy

A first-pass insulation screen suggests about 4,300 MWh/year of recoverable heat-loss reduction and about 1,500 t CO₂e/year of avoided emissions. Screening estimate scaled from installed process-heat projects and surface-temperature reduction data.

See Inzonex Modular Insulation → Run the calculator →

Screening calculation from facility class, capacity and open emissions/energy context. Engineering survey required before procurement.

Safety & the no-regret first step

Start with a thermal survey of valves, flanges, doors and bends. Removable modular insulation keeps maintenance access open while lowering exposed-surface temperature and wasted heat.

External climate finance your country can access

For energy-efficiency projects around process heat, likely external funding channels include:

CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.

Sources: country climate-finance facilities and public development-bank programmes.

Frequently asked questions

What type of facility is Xinjiang Kunyu Iron and Steel Co Ltd?

Xinjiang Kunyu Iron and Steel Co Ltd is a steel plant in China. Steel plants burn coal in blast furnaces or use electric arcs to melt scrap; in both cases the molten metal must be kept above 1,500°C and transferred through extensive hot piping and vessels.

How much CO₂ does Xinjiang Kunyu Iron and Steel Co Ltd emit?

The page uses about 1,130,658 t CO₂e/year from the open dataset It ranks #514 among facilities in China by estimated CO₂.

Where is Xinjiang Kunyu Iron and Steel Co Ltd located?

Xinjiang Kunyu Iron and Steel Co Ltd is in China at approximately 44.40321, 84.96468.

Who operates Xinjiang Kunyu Iron and Steel Co Ltd?

The operator recorded in the open dataset is Xinjiang Kunyu Lron & Steel Co Ltd.

Built from open public data; no personal information. Operate this site? Request a correction or removal.