Home / Oceania / Australia / Petrochemical plants / Qenos Pty. Ltd., Botany,NSW

Qenos Pty. Ltd., Botany,NSW

Petrochemical in Australia. Approximate location -33.9531, 151.21917.

PetrochemicalAustralia

Qenos Pty. Ltd., Botany,NSW is a petrochemical in Australia. Its listed capacity is 250,000 t of ethylene. Petrochemical plants crack hydrocarbons at very high temperatures to produce ethylene, propylene and other building-block chemicals — one of the most heat-intensive industrial processes. It is operated by Blackstone Group LP.

250,000t of ethylene

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-732020.

Data status

Known source data

FacilityQenos Pty. Ltd., Botany,NSW Climate TRACE
CountryAustralia Climate TRACE
Coordinates-33.9531, 151.21917 Climate TRACE
Sector / subsectorpetrochemical-steam-cracking Climate TRACE
Reported capacity250,000 t of ethylene Climate TRACE
Owner / operatorBlackstone Group LP Climate TRACE

Calculated from the dataset

Climate contextderived from coordinates calculated

Not available

Fuel typeNot available not in dataset
Thermal capacity (MW)Not available not in dataset

Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.

Operating power plants within 50 km

PowerAtlas operating assets, ordered by great-circle distance from published coordinates.

In context: how this facility compares

At 250,000 t of ethylene, Qenos Pty. Ltd., Botany,NSW is around the median petrochemical in Australia (250,000 t of ethylene). Subsector: petrochemical-steam-cracking. As petrochemical, it requires high process heat (typically 300–800°C) for its core industrial operations — heat that must be supplied by boilers, furnaces or direct combustion, and losses through uninsulated vessels and piping represent wasted fuel. Removable modular insulation can cut those losses by 80–96%, surface-cooling equipment to ≤45°C, with payback often under 2 years. Petrochemical plants crack hydrocarbons at very high temperatures to produce ethylene, propylene and other building-block chemicals — one of the most heat-intensive industrial processes.

Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.

Operator

Operated by Blackstone Group LP.

Local climate

Qenos Pty. Ltd., Botany,NSW sits in a humid subtropical climate zone (Köppen Cfa), at 34.0°S in the southern hemisphere.

~18°Ctypical annual mean
~27°Ctypical warm-season
Humid subtropical: hot summers and mild winters

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

Site climate & environmental severity

The local climate sets how fast unprotected steel, protective coatings and the insulation on hot process equipment degrade at this site. It sits in an aggressive, high-corrosion environment (estimated ISO 9223 class C5 — Very high), with marine salt corrosion the leading environmental stress.

C5ISO 9223 corrosivity (indicative)
41/100environmental-severity index
9.7°Cseasonal temperature swing
22 kmdistance to coast
Very highCUI risk tier

In this site’s local climate, a bare 150 °C surface sheds about 1326 W/m² to ambient — roughly 1.02× the loss at a 20 °C reference; removable insulation recovers about 1260 W/m² of that. Reference-surface calculation at a 150 °C surface from WorldClim climate normals (ASTM C680 / ISO 12241) — an indicative per-climate comparison, not a measurement of this site’s specific equipment. Open method dataset: DOI 10.5281/zenodo.20787408 (CC BY 4.0).

Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby sites

Nearby industrial sites

Location

Coordinates -33.9531, 151.21917. View on OpenStreetMap.

Heat loss & insulation profile

For a petrochemical, the main modular-insulation targets are steam crackers, quench towers, fractionators, heat exchangers, steam lines, valves & flanges. Typical hot-surface ranges used for screening: 150–550 °C.

Safety & the no-regret first step

Start with a thermal survey of valves, flanges, doors and bends. Removable modular insulation keeps maintenance access open while lowering exposed-surface temperature and wasted heat.

External climate finance your country can access

For energy-efficiency projects around process heat, likely external funding channels include:

Sources: country climate-finance facilities and public development-bank programmes.

Frequently asked questions

What type of facility is Qenos Pty. Ltd., Botany,NSW?

Qenos Pty. Ltd., Botany,NSW is a petrochemical in Australia. Petrochemical plants crack hydrocarbons at very high temperatures to produce ethylene, propylene and other building-block chemicals — one of the most heat-intensive industrial processes.

What capacity is listed for Qenos Pty. Ltd., Botany,NSW?

The open dataset lists 250,000 t of ethylene of capacity for Qenos Pty. Ltd., Botany,NSW.

Where is Qenos Pty. Ltd., Botany,NSW located?

Qenos Pty. Ltd., Botany,NSW is in Australia at approximately -33.9531, 151.21917.

Who operates Qenos Pty. Ltd., Botany,NSW?

The operator recorded in the open dataset is Blackstone Group LP.

Built from open public data; no personal information. Operate this site? Request a correction or removal.