Ustyurt Gas Chemical Complex, Ustyurt

Ustyurt Gas Chemical Complex, Ustyurt is a petrochemical in Uzbekistan with a reported capacity of 400,000 t of ethylene. It cracks hydrocarbon feedstocks into building-block chemicals such as ethylene and propylene. It is operated by Uzbekneftegaz JSC. By capacity it ranks #1 of 2 petrochemical plants tracked in Uzbekistan. It emits about 381,516 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 88,931 cars. Its CO₂ per unit of capacity is about 29% below the median petrochemical.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-731997.

在上下文中：该设施如何比较

在400,000 t of ethylene时，Ustyurt Gas Chemical Complex, Ustyurt是Uzbekistan中petrochemical的中位数约 400,000 t of ethylene。 其单位容量的CO₂约为petrochemical中位数的低于 24%。 子部门：petrochemical-steam-cracking。 作为petrochemical，它需要强烈的工艺热量（通常300–800°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 石化厂在非常高的温度下裂化烃，生产乙烯、丙烯和其他基础化学品——是最热强度密集的工业过程之一。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 381,516 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest petrochemical plants in Uzbekistan

Reported capacity (t of ethylene), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Operator

Operated by Uzbekneftegaz JSC. All facilities by this operator →

Local climate

Ustyurt Gas Chemical Complex, Ustyurt sits in a cold desert climate zone (Köppen BWk), at 43.2°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #1 largest of 2 petrochemical plants in Uzbekistan by reported capacity.

Nearby industrial sites

• Kungrad Soda Plant · Chemical Plant · 60,012 t CO₂

Location

Coordinates 43.1765, 58.26875. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions