Japan

Japan is a chemical plant in Japan with a reported capacity of 246,036 t of chemical. It manufactures industrial and specialty chemicals. By capacity it ranks #2 of 8 chemical plants tracked in Japan. It emits about 53,814 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 12,544 cars. Its CO₂ per unit of capacity is about 100% below the median chemical plant.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-32267428.

在上下文中：该设施如何比较

在246,036 t of chemical时，Japan是Japan中chemical plant的中位数远高于 157,704 t of chemical。 其单位容量的CO₂约为chemical plant中位数的低于 85%。 子部门：chemicals。 作为chemical plant，它需要强烈的工艺热量（通常100–500°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 化学厂生产范围广泛的工业和专用化学品，许多需要精确的温度控制和持续的热输入来进行反应和分离。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 53,814 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest chemical plants in Japan

Reported capacity (t of chemical), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Japan sits in a humid subtropical climate zone (Köppen Cfa), at 37.7°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #2 largest of 8 chemical plants in Japan by reported capacity.

Nearby industrial sites

• Myojo Cement Itoigawa Cement Plant · Cement Plant · 710,267 t CO₂
• Hokuetsu Kishu Paper Co. Ltd - Nagaoka Mill · Pulp & Paper Mill · 52,624 t CO₂
• Taiheiyo Cement Omi Cement Plant · Cement Plant · 934,377 t CO₂
• Hokuetsu Kishu Paper Co. Ltd - Niigata Mill · Pulp & Paper Mill · 52,624 t CO₂
• JPN-Toyama_ammonia · Chemical Plant · 189,269 t CO₂
• Daiichi Amimono Co., Ltd. · Textiles · 630 t CO₂

Location

Coordinates 37.66311, 138.06496. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions