CMS Cement Kuching Cement Plant

CMS Cement Kuching Cement Plant is a cement plant in Malaysia with a reported capacity of 1,000,000 t of cement. It burns limestone in high-temperature rotary kilns to make clinker and cement. It is operated by Cahya Mata Cement Sdn Bhd. By capacity it ranks #11 of 12 cement plants tracked in Malaysia. It emits about 338,149 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 78,823 cars. Its CO₂ per unit of capacity is about 6% below the median cement plant.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-42546766.

在上下文中：该设施如何比较

在1,000,000 t of cement时，CMS Cement Kuching Cement Plant是Malaysia中cement plant的中位数低于 2,300,000 t of cement。 其单位容量的CO₂约为cement plant中位数的低于 9%。 子部门：cement。 作为cement plant，它需要强烈的工艺热量（通常800–1400°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 水泥厂在回转窑中将石灰石加热到1,400°C——是最热的工业过程之一——必须在整个窑长上精确控制温度。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 338,149 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest cement plants in Malaysia

Reported capacity (t of cement), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Operator

Operated by Cahya Mata Cement Sdn Bhd. All facilities by this operator →

Local climate

CMS Cement Kuching Cement Plant sits in a tropical rainforest climate zone (Köppen Af), at 1.5°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #11 largest of 12 cement plants in Malaysia by reported capacity.

Nearby industrial sites

• CMS Cement Siburan Cement Plant · Cement Plant · 372,320 t CO₂

Location

Coordinates 1.54564, 110.3911. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions