Cement Plant in China. Approximate location 41.60736, 120.54965.
Cement PlantChinaCO₂ reported
Chaoyang Lanling Cement Co. Cement Plant is a cement plant in China with a reported capacity of 514,085 t of cement. It burns limestone in high-temperature rotary kilns to make clinker and cement. It is operated by Chaoyang Lanling Cement Co. By capacity it ranks #721 of 739 cement plants tracked in China. It emits about 130,177 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 30,344 cars. Its CO₂ per unit of capacity is about 30% below the median cement plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-32438233.
514,085 t of cement'de, Chaoyang Lanling Cement Co. Cement Plant China'daki cement plant'lerin medyanı altında 2,000,000 t of cement'dir. Kapasite başına CO₂'si cement plant'nin medyanı altında kabaca 30%'dir. Alt sektör: cement. cement plant olarak, temel endüstriyel işlemleri için yoğun proses ısısı (tipik olarak 800–1400°C) gerektirir — kazanlar, fırınlar veya doğrudan yanma ile sağlanması gereken ısı, ve izolasyon yapılmamış kaplar ve boruların kayıpları harcanan yakıtı temsil eder. Modüler çıkarılabilir yalıtım bu kayıpları %80–96 oranında azaltabilir, yüzeyleri ≤45°C'ye soğutabilir, geri ödeme süresi genellikle 2 yıldan azdır. Çimento fabrikaları kireci döner ocaklarda 1.400°C'ye ısıtır — en sıcak endüstriyel işlemlerden biridir — ve sıcaklığı fırının tüm uzunluğunda hassasiyetle kontrol etmelidir.
Kapasite ve CO₂ yoğunluğu karşılaştırması Climate TRACE endüstriyel tesis verilerinden hesaplanmıştır; sektör rolü mühendislik referansına dayanmaktadır.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of cement), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by Chaoyang Lanling Cement Co. All facilities by this operator →
Chaoyang Lanling Cement Co. Cement Plant sits in a monsoon hot-summer continental climate zone (Köppen Dwa), at 41.6°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #721 largest of 739 cement plants in China by reported capacity.
Coordinates 41.60736, 120.54965. View on OpenStreetMap.
A cement plant like this runs hot equipment that sheds heat continuously: rotary kiln shell, preheater tower, tertiary air duct & kiln hood, clinker-cooler ducts, valves (surface/process temperatures around 200–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
60% of cement CO2 is process calcination - NOT insulation-addressable; energy here is the fuel side only.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 8,000 MWh/yr (≈ 2,700 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
Chaoyang Lanling Cement Co. Cement Plant is a cement plant in China. It burns limestone in high-temperature rotary kilns to make clinker and cement.
Chaoyang Lanling Cement Co. Cement Plant has a reported capacity of 514,085 t of cement.
Chaoyang Lanling Cement Co. Cement Plant emits about 130,177 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 30,344 cars. That ranks #2662 among tracked facilities in China.
Chaoyang Lanling Cement Co. Cement Plant is in China, near coordinates 41.60736, 120.54965.
Chaoyang Lanling Cement Co. Cement Plant is operated by Chaoyang Lanling Cement Co.
