CMC Steel Texas plant

CMC Steel Texas plant is a steel plant in United States with a reported capacity of 943,000 t of steel. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace). It is operated by Commercial Metals Co. By capacity it ranks #38 of 75 steel plants tracked in United States. It emits about 52,339 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 12,200 cars. Its CO₂ per unit of capacity is about 90% below the median steel plant.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1567110.

В контексте: как это предприятие сравнивается

На мощности 943,000 t of steel CMC Steel Texas plant — это примерно медианная steel plant в United States (1,000,000 t of steel). Его выброс CO₂ на единицу мощности примерно на 50% ниже медианной steel plant. Подсектор: iron-and-steel. Как steel plant, оно требует высокотемпературного технологического тепла (обычно 800–1500°C) для основных промышленных операций — тепла, которое должно подаваться котлами, печами или прямым сжиганием, и потери через неизолированные сосуды и трубопроводы представляют потраченное впустую топливо. Съёмная модульная теплоизоляция может снизить эти потери на 80–96%, охладив поверхность оборудования до ≤45°C, с окупаемостью часто менее 2 лет. Сталелитейные заводы сжигают уголь в доменных печах или используют электрические дуги для плавления лома; в обоих случаях расплавленный металл должен находиться выше 1500°C и транспортироваться через обширные горячие трубопроводы и сосуды.

Сравнение производительности и интенсивности CO₂ рассчитано на основе данных промышленных объектов Climate TRACE; роль сектора основана на инженерных справочниках.

What 52,339 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest steel plants in United States

Reported capacity (t of steel), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Operator

Operated by Commercial Metals Co. All facilities by this operator →

Local climate

CMC Steel Texas plant sits in a humid subtropical climate zone (Köppen Cfa), at 29.6°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #38 largest of 75 steel plants in United States by reported capacity.

Nearby industrial sites

• Georgia-Pacific Gypsum LLC - McQueeney · Metals Plant · 45,965 t CO₂
• Tyson Foods, Inc. · Food & Beverage · 4,154 t CO₂
• Quirk Artisan Foods · Food & Beverage · 4,154 t CO₂
• Granzin'S Meat Market Inc · Food & Beverage · 4,154 t CO₂
• 1845 Smoked Meat Company, Llc · Food & Beverage · 4,154 t CO₂
• Guadalupe Brewing Company Llc · Food & Beverage · 4,154 t CO₂

Location

Coordinates 29.57722, -98.03184. View on OpenStreetMap.

Heat loss & insulation profile

A steel plant like this runs hot equipment that sheds heat continuously: reheat & annealing furnaces, ladles, hot-blast stoves, steam & gas ducting (surface/process temperatures around 200–1,200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 3,600 MWh/yr (≈ 1,200 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

United States: funding & obligation

Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.

Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).

Verified 2026; confirm current scheme terms before applying.

Frequently asked questions