Food & Beverage in Germany. Approximate location 48.88648, 12.35354.
Food & BeverageGermanyCO₂ not individually reported
Südstärke Gmbh Werk Sünching is a food & beverage plant in Germany. Food & beverage plants use boilers, cookers, pasteurisers and dryers that run continuously; heat loss from uninsulated piping and vessels directly reduces throughput and efficiency. No facility-measured CO₂ figure is available in the open dataset used here.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38480493.
Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.
PowerAtlas operating assets, ordered by great-circle distance from published coordinates.
Subsector: food-beverage-tobacco. As food & beverage plant, it requires high process heat (typically 80–200°C) for its core industrial operations — heat that must be supplied by boilers, furnaces or direct combustion, and losses through uninsulated vessels and piping represent wasted fuel. Removable modular insulation can cut those losses by 80–96%, surface-cooling equipment to ≤45°C, with payback often under 2 years. Food & beverage plants use boilers, cookers, pasteurisers and dryers that run continuously; heat loss from uninsulated piping and vessels directly reduces throughput and efficiency.
Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.
No facility-measured CO₂ is published for Südstärke Gmbh Werk Sünching; Climate TRACE provides only a food & beverage sector-level estimate, so a precise per-site figure, ranking or carbon cost would be misleading and is not shown. The decarbonization lever is the same regardless: eliminating heat loss on hot equipment (removable insulation, steam & waste-heat recovery) typically cuts 2–5% of fuel-related CO₂, with payback up to 2 years.
CO₂: Climate TRACE sector-level estimate (not facility-measured). Estimate the saving for this site →
Südstärke Gmbh Werk Sünching sits in a temperate oceanic climate zone (Köppen Cfb), at 48.9°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The local climate sets how fast unprotected steel, protective coatings and the insulation on hot process equipment degrade at this site. It sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with humidity / wetness the leading environmental stress.
In this site’s local climate, a bare 150 °C surface sheds about 1417 W/m² to ambient — roughly 1.09× the loss at a 20 °C reference; removable insulation recovers about 1346 W/m² of that. Reference-surface calculation at a 150 °C surface from WorldClim climate normals (ASTM C680 / ISO 12241) — an indicative per-climate comparison, not a measurement of this site’s specific equipment. Open method dataset: DOI 10.5281/zenodo.20787408 (CC BY 4.0).
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
Coordinates 48.88648, 12.35354. View on OpenStreetMap.
For a food & beverage plant, the main modular-insulation targets are cookers & kettles, pasteurisers, CIP hot-water sets, dryers, steam lines, tanks, valves. Typical hot-surface ranges used for screening: 70–200 °C °C.
very wide by site size; many bare low-temp surfaces (CIP, steam, pasteurisation) - often toward upper end.
A first-pass insulation screen suggests about 3,800 MWh/year of recoverable heat-loss reduction and about 760 t CO₂e/year of avoided emissions. Screening estimate scaled from installed process-heat projects and surface-temperature reduction data.
See Inzonex Modular Insulation → Run the calculator →
Screening calculation from facility class, capacity and open emissions/energy context. Engineering survey required before procurement.
Start with a thermal survey of valves, flanges, doors and bends. Removable modular insulation keeps maintenance access open while lowering exposed-surface temperature and wasted heat.
Funding. Grant 20-60% depending on module and company size; Modul 4 = energy/resource optimization of plants & processes (insulation fits). Foerderwettbewerb round budget ~EUR 60M. official source · verified 2026
Obligation. Mandatory energy audit if avg final energy 2.77-23.6 GWh/yr; certified EnMS/EMS if >23.6 GWh/yr; implementation plans for economically viable measures within 3 months of audit. (applies as a rule above the stated threshold — we do not hold this site's metered energy use). official source · verified 2026
Status: Thresholds are an April-2026 DRAFT amendment (previously 7.5 GWh EnMS) — confirm enacted before publishing.
Programme terms verified 2026-06-18; confirm the current open phase before applying. Eligibility depends on a site's energy use / headcount, which we do not hold — not a per-facility eligibility determination.
Südstärke Gmbh Werk Sünching is a food & beverage plant in Germany. Food & beverage plants use boilers, cookers, pasteurisers and dryers that run continuously; heat loss from uninsulated piping and vessels directly reduces throughput and efficiency.
The open dataset used here does not include a facility-level CO₂ value for Südstärke Gmbh Werk Sünching.
Südstärke Gmbh Werk Sünching is in Germany at approximately 48.88648, 12.35354.
