Petrochemical in China. Approximate location 34.5558, 119.59119.
PetrochemicalChinaCO₂ not individually reported
Shenghong Petrochemical, Jiangsu, Lianyungang is a petrochemical in China. Petrochemical plants crack hydrocarbons at very high temperatures to produce ethylene, propylene and other building-block chemicals — one of the most heat-intensive industrial processes. No facility-measured CO₂ figure is available in the open dataset used here.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-18648401.
Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.
PowerAtlas operating assets, ordered by great-circle distance from published coordinates.
Subsector: petrochemical-steam-cracking. As petrochemical, it requires high process heat (typically 300–800°C) for its core industrial operations — heat that must be supplied by boilers, furnaces or direct combustion, and losses through uninsulated vessels and piping represent wasted fuel. Removable modular insulation can cut those losses by 80–96%, surface-cooling equipment to ≤45°C, with payback often under 2 years. Petrochemical plants crack hydrocarbons at very high temperatures to produce ethylene, propylene and other building-block chemicals — one of the most heat-intensive industrial processes.
Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.
No facility-measured CO₂ is published for Shenghong Petrochemical, Jiangsu, Lianyungang; Climate TRACE provides only a petrochemical sector-level estimate, so a precise per-site figure, ranking or carbon cost would be misleading and is not shown. The decarbonization lever is the same regardless: eliminating heat loss on hot equipment (removable insulation, steam & waste-heat recovery) typically cuts 2–5% of fuel-related CO₂, with payback up to 2 years. No domestic carbon price — but cement, steel, aluminium, fertilizer and hydrogen exported to the EU face CBAM at €75/t (rising to 100% by 2034).
CO₂: Climate TRACE sector-level estimate (not facility-measured). Estimate the saving for this site →
Shenghong Petrochemical, Jiangsu, Lianyungang sits in a humid subtropical (dry winter) climate zone (Köppen Cwa), at 34.6°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The local climate sets how fast unprotected steel, protective coatings and the insulation on hot process equipment degrade at this site. It sits in a corrosive environment (estimated ISO 9223 class C4 — High), with thermal cycling the leading environmental stress.
In this site’s local climate, a bare 150 °C surface sheds about 1362 W/m² to ambient — roughly 1.05× the loss at a 20 °C reference; removable insulation recovers about 1294 W/m² of that. Reference-surface calculation at a 150 °C surface from WorldClim climate normals (ASTM C680 / ISO 12241) — an indicative per-climate comparison, not a measurement of this site’s specific equipment. Open method dataset: DOI 10.5281/zenodo.20787408 (CC BY 4.0).
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
Coordinates 34.5558, 119.59119. View on OpenStreetMap.
For a petrochemical, the main modular-insulation targets are steam crackers, quench towers, fractionators, heat exchangers, steam lines, valves & flanges. Typical hot-surface ranges used for screening: 150–550 °C.
Start with a thermal survey of valves, flanges, doors and bends. Removable modular insulation keeps maintenance access open while lowering exposed-surface temperature and wasted heat.
For energy-efficiency projects around process heat, likely external funding channels include:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Sources: country climate-finance facilities and public development-bank programmes.
Shenghong Petrochemical, Jiangsu, Lianyungang is a petrochemical in China. Petrochemical plants crack hydrocarbons at very high temperatures to produce ethylene, propylene and other building-block chemicals — one of the most heat-intensive industrial processes.
The open dataset used here does not include a facility-level CO₂ value for Shenghong Petrochemical, Jiangsu, Lianyungang.
Shenghong Petrochemical, Jiangsu, Lianyungang is in China at approximately 34.5558, 119.59119.
