Pulp & Paper Mill in Poland. Approximate location 53.39314, 18.37831.
Pulp & Paper MillPolandCO₂ not individually reported
Mondi Świecie Pulp Mill is a pulp & paper mill in Poland. Pulp and paper mills generate their own steam for the pulping process and paper dryers, running large-scale boiler systems where heat loss directly reduces efficiency. It is operated by Mondi Swiecie SA. No facility-measured CO₂ figure is available in the open dataset used here.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-44375635.
Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.
PowerAtlas operating assets, ordered by great-circle distance from published coordinates.
Subsector: pulp-and-paper. As pulp & paper mill, it requires high process heat (typically 150–250°C) for its core industrial operations — heat that must be supplied by boilers, furnaces or direct combustion, and losses through uninsulated vessels and piping represent wasted fuel. Removable modular insulation can cut those losses by 80–96%, surface-cooling equipment to ≤45°C, with payback often under 2 years. Pulp and paper mills generate their own steam for the pulping process and paper dryers, running large-scale boiler systems where heat loss directly reduces efficiency.
Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.
No facility-measured CO₂ is published for Mondi Świecie Pulp Mill; Climate TRACE provides only a pulp & paper mill sector-level estimate, so a precise per-site figure, ranking or carbon cost would be misleading and is not shown. The decarbonization lever is the same regardless: eliminating heat loss on hot equipment (removable insulation, steam & waste-heat recovery) typically cuts 2–5% of fuel-related CO₂, with payback up to 2 years.
CO₂: Climate TRACE sector-level estimate (not facility-measured). Estimate the saving for this site →
Operated by Mondi Swiecie SA.
Mondi Świecie Pulp Mill sits in a temperate oceanic climate zone (Köppen Cfb), at 53.4°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The local climate sets how fast unprotected steel, protective coatings and the insulation on hot process equipment degrade at this site. It sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
In this site’s local climate, a bare 150 °C surface sheds about 1421 W/m² to ambient — roughly 1.09× the loss at a 20 °C reference; removable insulation recovers about 1350 W/m² of that. Reference-surface calculation at a 150 °C surface from WorldClim climate normals (ASTM C680 / ISO 12241) — an indicative per-climate comparison, not a measurement of this site’s specific equipment. Open method dataset: DOI 10.5281/zenodo.20787408 (CC BY 4.0).
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
Coordinates 53.39314, 18.37831. View on OpenStreetMap.
For a pulp & paper mill, the main modular-insulation targets are digesters, dryers, evaporators, steam lines, hot-water systems. Typical hot-surface ranges used for screening: 80–200 °C °C.
A first-pass insulation screen suggests about 6,500 MWh/year of recoverable heat-loss reduction and about 1,300 t CO₂e/year of avoided emissions. Screening estimate scaled from installed process-heat projects and surface-temperature reduction data.
See Inzonex Modular Insulation → Run the calculator →
Screening calculation from facility class, capacity and open emissions/energy context. Engineering survey required before procurement.
Start with a thermal survey of valves, flanges, doors and bends. Removable modular insulation keeps maintenance access open while lowering exposed-surface temperature and wasted heat.
Obligation
This facility is inside the EU. For thermal equipment, insulation upgrades can support ETS exposure reduction and energy-efficiency compliance.
Sources: EU ETS, CBAM and national energy-efficiency schemes.
Mondi Świecie Pulp Mill is a pulp & paper mill in Poland. Pulp and paper mills generate their own steam for the pulping process and paper dryers, running large-scale boiler systems where heat loss directly reduces efficiency.
The open dataset used here does not include a facility-level CO₂ value for Mondi Świecie Pulp Mill.
Mondi Świecie Pulp Mill is in Poland at approximately 53.39314, 18.37831.
The operator recorded in the open dataset is Mondi Swiecie SA.
