Petrochemical in Slovakia. Approximate location 48.12791, 17.18024.
PetrochemicalSlovakiaCO₂ estimate (modelled)
MOL Slovnaft AS, Bratislava is a petrochemical in Slovakia. Its listed capacity is 220,000 t of ethylene. Petrochemical plants crack hydrocarbons at very high temperatures to produce ethylene, propylene and other building-block chemicals — one of the most heat-intensive industrial processes. It emits about 275,853 t CO₂e a year from Climate TRACE, roughly comparable to the annual emissions of 64k passenger cars.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-18648371.
Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.
Same Climate TRACE subsector; closest non-placeholder modelled CO₂e values. Russia and Belarus excluded.
PowerAtlas operating assets, ordered by great-circle distance from published coordinates.
At 220,000 t of ethylene, MOL Slovnaft AS, Bratislava is around the median petrochemical in Slovakia (220,000 t of ethylene). Subsector: petrochemical-steam-cracking. As petrochemical, it requires high process heat (typically 300–800°C) for its core industrial operations — heat that must be supplied by boilers, furnaces or direct combustion, and losses through uninsulated vessels and piping represent wasted fuel. Removable modular insulation can cut those losses by 80–96%, surface-cooling equipment to ≤45°C, with payback often under 2 years. Petrochemical plants crack hydrocarbons at very high temperatures to produce ethylene, propylene and other building-block chemicals — one of the most heat-intensive industrial processes.
Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.
This facility's estimated annual CO₂e (Climate TRACE, modelled) in everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
At its reported 276k t CO₂e/yr (Scope 1), MOL Slovnaft AS, Bratislava carries €21.9M/yr of carbon at the full EU ETS price (€79/t CO₂). Free allocation phases out to 2034 (Reg. (EU) 2023/956), so today's bill is lower and rising toward this full-price figure. The fastest decarbonization lever is energy efficiency: eliminating heat loss on hot equipment (removable insulation, steam & waste-heat recovery) typically cuts 2–5% of fuel-related CO₂ — here ≈6k t–14k t/yr, worth €438k–€1.1M, with payback up to 2 years.
Carbon price: EU ETS €79/t · EU ETS €79/t, July 2, 2026, refreshed live via Carbon Hub. CO₂: Climate TRACE. Efficiency range: US DOE / ASTM C680 (method). Indicative carbon value, not the cash bill — free allocation applies; not compliance advice. Estimate the saving for this site →
MOL Slovnaft AS, Bratislava sits in a temperate oceanic climate zone (Köppen Cfb), at 48.1°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The local climate sets how fast unprotected steel, protective coatings and the insulation on hot process equipment degrade at this site. It sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with humidity / wetness the leading environmental stress.
In this site’s local climate, a bare 150 °C surface sheds about 1399 W/m² to ambient — roughly 1.08× the loss at a 20 °C reference; removable insulation recovers about 1329 W/m² of that. Reference-surface calculation at a 150 °C surface from WorldClim climate normals (ASTM C680 / ISO 12241) — an indicative per-climate comparison, not a measurement of this site’s specific equipment. Open method dataset: DOI 10.5281/zenodo.20787408 (CC BY 4.0).
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
Coordinates 48.12791, 17.18024. View on OpenStreetMap.
For a petrochemical, the main modular-insulation targets are steam crackers, quench towers, fractionators, heat exchangers, steam lines, valves & flanges. Typical hot-surface ranges used for screening: 150–550 °C.
Start with a thermal survey of valves, flanges, doors and bends. Removable modular insulation keeps maintenance access open while lowering exposed-surface temperature and wasted heat.
Obligation
This facility is inside the EU. For thermal equipment, insulation upgrades can support ETS exposure reduction and energy-efficiency compliance.
Sources: EU ETS, CBAM and national energy-efficiency schemes.
MOL Slovnaft AS, Bratislava is a petrochemical in Slovakia. Petrochemical plants crack hydrocarbons at very high temperatures to produce ethylene, propylene and other building-block chemicals — one of the most heat-intensive industrial processes.
The open dataset lists 220,000 t of ethylene of capacity for MOL Slovnaft AS, Bratislava.
The page uses about 275,853 t CO₂e/year from the open dataset It ranks #11 among facilities in Slovakia by estimated CO₂.
MOL Slovnaft AS, Bratislava is in Slovakia at approximately 48.12791, 17.18024.
