Other Manufacturing in United States. Approximate location 34.92566, -82.26203.
Other ManufacturingUnited StatesCO₂ estimate (modelled)
MITSUBISHI CHEMICAL AMERICA, INC. - POLYESTER FILM DIVISION is an other manufacturing in United States. Heavy manufacturing facilities run a range of heat-intensive processes (rubber, plastics, pressure vessels); maintaining process heat efficiently is critical to cost control. It emits about 33,630 t CO₂e a year from Climate TRACE, roughly comparable to the annual emissions of 7.8k passenger cars.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3193666.
Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.
Same Climate TRACE subsector; closest non-placeholder modelled CO₂e values. Russia and Belarus excluded.
PowerAtlas operating assets, ordered by great-circle distance from published coordinates.
Subsector: other-manufacturing. As other manufacturing, it requires high process heat (typically 100–600°C) for its core industrial operations — heat that must be supplied by boilers, furnaces or direct combustion, and losses through uninsulated vessels and piping represent wasted fuel. Removable modular insulation can cut those losses by 80–96%, surface-cooling equipment to ≤45°C, with payback often under 2 years. Heavy manufacturing facilities run a range of heat-intensive processes (rubber, plastics, pressure vessels); maintaining process heat efficiently is critical to cost control.
Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.
This facility's estimated annual CO₂e (Climate TRACE, modelled) in everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
At its reported 34k t CO₂e/yr (Scope 1), MITSUBISHI CHEMICAL AMERICA, INC. - POLYESTER FILM DIVISION carries no domestic carbon price; other manufacturings are not a CBAM-covered good, so there is no border-carbon liability. At the EU ETS reference price (€75/t) the emissions carry an indicative carbon value of €2.5M/yr. The fastest decarbonization lever is energy efficiency: eliminating heat loss on hot equipment (removable insulation, steam & waste-heat recovery) typically cuts 2–5% of fuel-related CO₂ — here ≈673 t–2k t/yr, worth €51k–€127k, with payback up to 2 years. No domestic carbon price — but cement, steel, aluminium, fertilizer and hydrogen exported to the EU face CBAM at €75/t (rising to 100% by 2034).
Carbon price: EU CBAM €75/t · EU ETS €79/t, July 2, 2026, refreshed live via Carbon Hub. CO₂: Climate TRACE. Efficiency range: US DOE / ASTM C680 (method). Indicative carbon value, not the cash bill — free allocation applies; not compliance advice. Estimate the saving for this site →
Mitsubishi Chemical America Inc US EPA GHGRP
Parent company per US EPA GHGRP; the operator itself is not stated in the source dataset.
MITSUBISHI CHEMICAL AMERICA, INC. - POLYESTER FILM DIVISION sits in a humid subtropical climate zone (Köppen Cfa), at 34.9°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The local climate sets how fast unprotected steel, protective coatings and the insulation on hot process equipment degrade at this site. It sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
In this site’s local climate, a bare 150 °C surface sheds about 1344 W/m² to ambient — roughly 1.03× the loss at a 20 °C reference; removable insulation recovers about 1277 W/m² of that. Reference-surface calculation at a 150 °C surface from WorldClim climate normals (ASTM C680 / ISO 12241) — an indicative per-climate comparison, not a measurement of this site’s specific equipment. Open method dataset: DOI 10.5281/zenodo.20787408 (CC BY 4.0).
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
Coordinates 34.92566, -82.26203. View on OpenStreetMap.
For a other manufacturing, the main modular-insulation targets are process heaters, ovens, steam lines, hot-water systems, valves & flanges. Typical hot-surface ranges used for screening: 80–300 °C.
A first-pass insulation screen suggests about 1,300 MWh/year of recoverable heat-loss reduction and about 260 t CO₂e/year of avoided emissions. Screening estimate scaled from installed process-heat projects and surface-temperature reduction data.
See Inzonex Modular Insulation → Run the calculator →
Screening calculation from facility class, capacity and open emissions/energy context. Engineering survey required before procurement.
Start with a thermal survey of valves, flanges, doors and bends. Removable modular insulation keeps maintenance access open while lowering exposed-surface temperature and wasted heat.
Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers. official source · verified 2026
Status: ~$6B of $10B allocated Jan-2025; remaining capacity + IRA status under political review — verify before 'apply now'.
Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we do not hold this site's metered energy use). · verified 2026
Programme terms verified 2026-06-18; confirm the current open phase before applying. Eligibility depends on a site's energy use / headcount, which we do not hold — not a per-facility eligibility determination.
MITSUBISHI CHEMICAL AMERICA, INC. - POLYESTER FILM DIVISION is a other manufacturing in United States. Heavy manufacturing facilities run a range of heat-intensive processes (rubber, plastics, pressure vessels); maintaining process heat efficiently is critical to cost control.
The page uses about 33,630 t CO₂e/year from the open dataset It ranks #1285 among facilities in United States by estimated CO₂.
MITSUBISHI CHEMICAL AMERICA, INC. - POLYESTER FILM DIVISION is in United States at approximately 34.92566, -82.26203.
