Pulp & Paper Mill in Russian Federation. Approximate location 55.87228, 48.35685.
Pulp & Paper MillRussian FederationCO₂ estimate (modelled)
Mari Pulp and Paper Mill JSC - MARIPAPER / Mari PPM is a pulp & paper mill in Russian Federation. Its listed capacity is 50,000 t of pulp & paper. Pulp and paper mills generate their own steam for the pulping process and paper dryers, running large-scale boiler systems where heat loss directly reduces efficiency. By capacity it ranks #3 among 3 pulp & paper mills in Russian Federation. It emits about 27,021 t CO₂e a year from Climate TRACE, roughly comparable to the annual emissions of 6.3k passenger cars.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-44375647.
Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.
Same Climate TRACE subsector; closest non-placeholder modelled CO₂e values. Russia and Belarus excluded.
At 50,000 t of pulp & paper, Mari Pulp and Paper Mill JSC - MARIPAPER / Mari PPM is below the median pulp & paper mill in Russian Federation (155,000 t of pulp & paper). Subsector: pulp-and-paper. As pulp & paper mill, it requires high process heat (typically 150–250°C) for its core industrial operations — heat that must be supplied by boilers, furnaces or direct combustion, and losses through uninsulated vessels and piping represent wasted fuel. Removable modular insulation can cut those losses by 80–96%, surface-cooling equipment to ≤45°C, with payback often under 2 years. Pulp and paper mills generate their own steam for the pulping process and paper dryers, running large-scale boiler systems where heat loss directly reduces efficiency.
Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.
This facility's estimated annual CO₂e (Climate TRACE, modelled) in everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
At its reported 27k t CO₂e/yr (Scope 1), Mari Pulp and Paper Mill JSC - MARIPAPER / Mari PPM carries no domestic carbon price; pulp & paper mills are not a CBAM-covered good, so there is no border-carbon liability. At the EU ETS reference price (€75/t) the emissions carry an indicative carbon value of €2.0M/yr. The fastest decarbonization lever is energy efficiency: eliminating heat loss on hot equipment (removable insulation, steam & waste-heat recovery) typically cuts 2–5% of fuel-related CO₂ — here ≈540 t–1k t/yr, worth €41k–€102k, with payback up to 2 years. No domestic carbon price — but cement, steel, aluminium, fertilizer and hydrogen exported to the EU face CBAM at €75/t (rising to 100% by 2034).
Carbon price: EU CBAM €75/t · EU ETS €79/t, July 2, 2026, refreshed live via Carbon Hub. CO₂: Climate TRACE. Efficiency range: US DOE / ASTM C680 (method). Indicative carbon value, not the cash bill — free allocation applies; not compliance advice. Estimate the saving for this site →
Listed capacity (t of pulp & paper), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Mari Pulp and Paper Mill JSC - MARIPAPER / Mari PPM sits in a warm-summer humid continental climate zone (Köppen Dfb), at 55.9°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #3 largest of 3 pulp & paper mills in Russian Federation by listed capacity (Climate TRACE).
Coordinates 55.87228, 48.35685. View on OpenStreetMap.
For a pulp & paper mill, the main modular-insulation targets are digesters, dryers, evaporators, steam lines, hot-water systems. Typical hot-surface ranges used for screening: 80–200 °C.
A first-pass insulation screen suggests about 4,200 MWh/year of recoverable heat-loss reduction and about 830 t CO₂e/year of avoided emissions. Screening estimate scaled from installed process-heat projects and surface-temperature reduction data.
See Inzonex Modular Insulation → Run the calculator →
Screening calculation from facility class, capacity and open emissions/energy context. Engineering survey required before procurement.
Start with a thermal survey of valves, flanges, doors and bends. Removable modular insulation keeps maintenance access open while lowering exposed-surface temperature and wasted heat.
For energy-efficiency projects around process heat, likely external funding channels include:
Sources: country climate-finance facilities and public development-bank programmes.
Mari Pulp and Paper Mill JSC - MARIPAPER / Mari PPM is a pulp & paper mill in Russian Federation. Pulp and paper mills generate their own steam for the pulping process and paper dryers, running large-scale boiler systems where heat loss directly reduces efficiency.
The open dataset lists 50,000 t of pulp & paper of capacity for Mari Pulp and Paper Mill JSC - MARIPAPER / Mari PPM.
The page uses about 27,021 t CO₂e/year from the open dataset It ranks #184 among facilities in Russian Federation by estimated CO₂.
Mari Pulp and Paper Mill JSC - MARIPAPER / Mari PPM is in Russian Federation at approximately 55.87228, 48.35685.
