Marathon Canton Refinery is a refinery in United States. Refineries heat, fractionate and chemically transform crude oil into fuels and petrochemical feedstocks through energy-intensive distillation and cracking — extremely demanding on steam generation and heat recovery. It is operated by Marathon Petroleum Corp. It emits about 1,015,626 t CO₂e a year from Climate TRACE. That is 0.18% of the CO₂e from the 1,910 facilities in United States that have an emissions figure in IndustryAtlas.

1,015,626t CO₂e / yr (Climate TRACE)
#121CO₂ rank in United States

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1753327.

Data status

Known source data

FacilityMarathon Canton Refinery Climate TRACE
CountryUnited States Climate TRACE
Coordinates40.77293, -81.41388 Climate TRACE
Sector / subsectoroil-and-gas-refining Climate TRACE
Owner / operatorMarathon Petroleum Corp Climate TRACE
EPA parent companyMARATHON PETROLEUM CORP US EPA GHGRP
EPA NAICS324110 US EPA GHGRP
TRI facility recordMARATHON PETROLEUM CO LP OHIO REFINING DIV US EPA TRI
TRI parent companyMARATHON PETROLEUM CORP US EPA TRI
TRI NAICS324110 US EPA TRI
TRI reported chemicals1,2,4-Trimethylbenzene, 1,3-Butadiene, Ammonia, Antimony And Antimony Compounds, Benzene, Benzo[g,h,i]perylene… US EPA TRI
TRI on-site releases41,718 lb/yr US EPA TRI
Modelled CO₂e1,015,626 t/yr Climate TRACE
Measured CO₂ cross-check532,002 t/yr measured cross-check · GHGRP 2023

Calculated from the dataset

United States rank#121 of 1910 · top 6.3% calculated
Global oil-and-gas-refining rank#309 of 630 · top 49.0% calculated
Climate contextderived from coordinates calculated

Not available

Fuel typeNot available not in dataset
Thermal capacity (MW)Not available not in dataset

Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.

Similar facilities by modelled emissions

Same Climate TRACE subsector; closest non-placeholder modelled CO₂e values. Russia and Belarus excluded.

Operating power plants within 50 km

PowerAtlas operating assets, ordered by great-circle distance from published coordinates.

Measured and modelled emissions reconciliation

This facility is linked to GHGRP ID 1005390 for reporting year 2023. The official source reports 532,002 t CO2; Climate TRACE models 1,015,626 t CO2e.

Crosswalk checkResult
Modelled minus measured483,624 t
Difference as % of measured90.906%
Modelled / measured ratio1.90906
Coordinate distance0.100 km
Name similarity100%

Limits of this comparison

  • Measured CO2 and modelled CO2e are not identical accounting constructs.
  • The crosswalk is an entity match, not proof that reporting boundaries are identical.
  • The reporting year is shown explicitly and values are not extrapolated to the current year.

Official GHGRP source · Download this reconciliation: CSV · JSON with provenance.

In context: how this facility compares

Subsector: oil-and-gas-refining. As refinery, it requires high process heat (typically 200–600°C) for its core industrial operations, supplied by boilers, furnaces or direct combustion. Refineries heat, fractionate and chemically transform crude oil into fuels and petrochemical feedstocks through energy-intensive distillation and cracking — extremely demanding on steam generation and heat recovery.

Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.

What 1,015,626 t CO₂e a year looks like

This facility's estimated annual CO₂e (Climate TRACE, modelled) in everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

2.4 millionbarrels of crude oil burned
237kgasoline cars driven for a year
303wind turbines running for a year

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Carbon cost and Scope 1 emissions

At its reported 1.0M t CO₂e/yr (Scope 1), Marathon Canton Refinery carries no domestic carbon price, and its products are not CBAM-covered goods, so there is no border-carbon liability. At the EU ETS reference price (€75/t) the emissions carry an indicative carbon value of €76.5M/yr.

Measured CO₂: 532k t/yr — verified GHGRP (reporting year 2023) (48% below the modelled estimate). Modelled estimate 1.0M t/yr (Climate TRACE), high-confidence match, cross-checked via the measured-vs-modelled dataset (n=711).

1.0M t CO₂e / yrScope 1 emissions
€76.5M/yrindicative carbon value (not a CBAM liability)

Carbon price: EU CBAM €75/t · EU ETS €85/t, September 10, 2026, refreshed live via Carbon Hub. CO₂: measured (GHGRP RY2023), cross-checked vs Climate TRACE. Indicative carbon value, not the cash bill — free allocation applies; not compliance advice.

Local climate

Marathon Canton Refinery sits in a hot-summer humid continental climate zone (Köppen Dfa), at 40.8°N in the northern hemisphere.

~9°Ctypical annual mean
~23°Ctypical warm-season
Hot-summer humid continental: four distinct seasons — cold winters and warm summers

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

Site climate & environmental severity

This site sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with thermal cycling the leading environmental stress.

C3ISO 9223 corrosivity (indicative)
34/100environmental-severity index
25.6°Cseasonal temperature swing
88 kmdistance to coast
ModerateCUI risk tier

In this site’s local climate, a bare 150 °C surface sheds about 1401 W/m² to ambient — roughly 1.08× the loss at a 20 °C reference. Reference-surface calculation at a 150 °C surface from WorldClim climate normals (ASTM C680 / ISO 12241) — an indicative per-climate comparison, not a measurement of this site’s specific equipment. Open method dataset: DOI 10.5281/zenodo.20787408 (CC BY 4.0).

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby sites

Nearby industrial sites

Location

Coordinates 40.77293, -81.41388. View on OpenStreetMap.

Frequently asked questions

What type of facility is Marathon Canton Refinery?

Marathon Canton Refinery is a refinery in United States. Refineries heat, fractionate and chemically transform crude oil into fuels and petrochemical feedstocks through energy-intensive distillation and cracking — extremely demanding on steam generation and heat recovery.

How much CO₂ does Marathon Canton Refinery emit?

The page uses about 1,015,626 t CO₂e/year from the open dataset It ranks #121 among facilities in United States by estimated CO₂.

Where is Marathon Canton Refinery located?

Marathon Canton Refinery is in United States at approximately 40.77293, -81.41388.

Who operates Marathon Canton Refinery?

The operator recorded in the open dataset is Marathon Petroleum Corp.

Built from open public data; no personal information. Operate this site? Request a correction or removal.