Aluminium Smelter in China. Approximate location 34.95698, 118.30568.
Aluminium SmelterChinaCO₂ not individually reported
Linyi, Shandong aluminium plant is an aluminium smelter in China. Aluminium smelters use large electric currents to refine alumina into molten aluminium above 900°C, and the hot metal must flow through crucibles and casting equipment. It is operated by Huayu Aluminum and Power. No facility-measured CO₂ figure is available in the open dataset used here.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-43765166.
Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.
PowerAtlas operating assets, ordered by great-circle distance from published coordinates.
Subsector: aluminum. As aluminium smelter, it requires high process heat (typically 600–900°C) for its core industrial operations — heat that must be supplied by boilers, furnaces or direct combustion, and losses through uninsulated vessels and piping represent wasted fuel. Removable modular insulation can cut those losses by 80–96%, surface-cooling equipment to ≤45°C, with payback often under 2 years. Aluminium smelters use large electric currents to refine alumina into molten aluminium above 900°C, and the hot metal must flow through crucibles and casting equipment.
Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.
No facility-measured CO₂ is published for Linyi, Shandong aluminium plant; Climate TRACE provides only a aluminium smelter sector-level estimate, so a precise per-site figure, ranking or carbon cost would be misleading and is not shown. The decarbonization lever is the same regardless: eliminating heat loss on hot equipment (removable insulation, steam & waste-heat recovery) typically cuts 2–5% of fuel-related CO₂, with payback up to 2 years. No domestic carbon price — but cement, steel, aluminium, fertilizer and hydrogen exported to the EU face CBAM at €75/t (rising to 100% by 2034).
CO₂: Climate TRACE sector-level estimate (not facility-measured). Estimate the saving for this site →
Operated by Huayu Aluminum and Power.
Linyi, Shandong aluminium plant sits in a humid subtropical (dry winter) climate zone (Köppen Cwa), at 35.0°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The local climate sets how fast unprotected steel, protective coatings and the insulation on hot process equipment degrade at this site. It sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with thermal cycling the leading environmental stress.
In this site’s local climate, a bare 150 °C surface sheds about 1365 W/m² to ambient — roughly 1.05× the loss at a 20 °C reference; removable insulation recovers about 1297 W/m² of that. Reference-surface calculation at a 150 °C surface from WorldClim climate normals (ASTM C680 / ISO 12241) — an indicative per-climate comparison, not a measurement of this site’s specific equipment. Open method dataset: DOI 10.5281/zenodo.20787408 (CC BY 4.0).
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
Coordinates 34.95698, 118.30568. View on OpenStreetMap.
For a aluminium smelter, the main modular-insulation targets are alumina calciner, casthouse furnaces, hot ducting (electrolysis itself is electric). Typical hot-surface ranges used for screening: 150–1,000 °C.
electrolysis is mostly electricity (Scope 2) + anode process; on-site combustion small - insulation mainly relevant to alumina refining/casthouse.
A first-pass insulation screen suggests about 3,000 MWh/year of recoverable heat-loss reduction and about 600 t CO₂e/year of avoided emissions. Screening estimate scaled from installed process-heat projects and surface-temperature reduction data.
See Inzonex Modular Insulation → Run the calculator →
Screening calculation from facility class, capacity and open emissions/energy context. Engineering survey required before procurement.
Start with a thermal survey of valves, flanges, doors and bends. Removable modular insulation keeps maintenance access open while lowering exposed-surface temperature and wasted heat.
For energy-efficiency projects around process heat, likely external funding channels include:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Sources: country climate-finance facilities and public development-bank programmes.
Linyi, Shandong aluminium plant is a aluminium smelter in China. Aluminium smelters use large electric currents to refine alumina into molten aluminium above 900°C, and the hot metal must flow through crucibles and casting equipment.
The open dataset used here does not include a facility-level CO₂ value for Linyi, Shandong aluminium plant.
Linyi, Shandong aluminium plant is in China at approximately 34.95698, 118.30568.
The operator recorded in the open dataset is Huayu Aluminum and Power.
