Pulp & Paper Mill in Russian Federation. Approximate location 56.12646, 101.60594.
Pulp & Paper MillRussian FederationCO₂ not individually reported
Ilim Group - Ilim East - Bratsk Branch is a pulp & paper mill in Russian Federation. Pulp and paper mills generate their own steam for the pulping process and paper dryers, running large-scale boiler systems where heat loss directly reduces efficiency. It is operated by Ilim Group JSC. No facility-measured CO₂ figure is available in the open dataset used here.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-44375642.
Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.
Subsector: pulp-and-paper. As pulp & paper mill, it requires high process heat (typically 150–250°C) for its core industrial operations — heat that must be supplied by boilers, furnaces or direct combustion, and losses through uninsulated vessels and piping represent wasted fuel. Removable modular insulation can cut those losses by 80–96%, surface-cooling equipment to ≤45°C, with payback often under 2 years. Pulp and paper mills generate their own steam for the pulping process and paper dryers, running large-scale boiler systems where heat loss directly reduces efficiency.
Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.
No facility-measured CO₂ is published for Ilim Group - Ilim East - Bratsk Branch; Climate TRACE provides only a pulp & paper mill sector-level estimate, so a precise per-site figure, ranking or carbon cost would be misleading and is not shown. The decarbonization lever is the same regardless: eliminating heat loss on hot equipment (removable insulation, steam & waste-heat recovery) typically cuts 2–5% of fuel-related CO₂, with payback up to 2 years. No domestic carbon price — but cement, steel, aluminium, fertilizer and hydrogen exported to the EU face CBAM at €75/t (rising to 100% by 2034).
CO₂: Climate TRACE sector-level estimate (not facility-measured). Estimate the saving for this site →
Operated by Ilim Group JSC. All facilities by this operator →
Ilim Group - Ilim East - Bratsk Branch sits in a subarctic (boreal) climate zone (Köppen Dfc), at 56.1°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
Coordinates 56.12646, 101.60594. View on OpenStreetMap.
For a pulp & paper mill, the main modular-insulation targets are digesters, dryers, evaporators, steam lines, hot-water systems. Typical hot-surface ranges used for screening: 80–200 °C.
A first-pass insulation screen suggests about 6,500 MWh/year of recoverable heat-loss reduction and about 1,300 t CO₂e/year of avoided emissions. Screening estimate scaled from installed process-heat projects and surface-temperature reduction data.
See Inzonex Modular Insulation → Run the calculator →
Screening calculation from facility class, capacity and open emissions/energy context. Engineering survey required before procurement.
Start with a thermal survey of valves, flanges, doors and bends. Removable modular insulation keeps maintenance access open while lowering exposed-surface temperature and wasted heat.
For energy-efficiency projects around process heat, likely external funding channels include:
Sources: country climate-finance facilities and public development-bank programmes.
Ilim Group - Ilim East - Bratsk Branch is a pulp & paper mill in Russian Federation. Pulp and paper mills generate their own steam for the pulping process and paper dryers, running large-scale boiler systems where heat loss directly reduces efficiency.
The open dataset used here does not include a facility-level CO₂ value for Ilim Group - Ilim East - Bratsk Branch.
Ilim Group - Ilim East - Bratsk Branch is in Russian Federation at approximately 56.12646, 101.60594.
The operator recorded in the open dataset is Ilim Group JSC.
