Fels-Werke Gmbh

Fels-Werke Gmbh is a lime plant in Germany. Its listed capacity is 357,993 t of lime. Lime plants calcine limestone in hot kilns at 800–900°C, and the hot quicklime must be handled in insulated vessels to prevent reaction with moisture. By capacity it ranks #7 among 8 lime plants in Germany. It emits about 194,166 t CO₂e a year from Climate TRACE, roughly comparable to the annual emissions of 45k passenger cars. Its CO₂ per unit of capacity is 18% below the national median for this sector.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38467587.

In context: how this facility compares

At 357,993 t of lime, Fels-Werke Gmbh is below the median lime plant in Germany (619,533 t of lime). Subsector: lime. As lime plant, it requires high process heat (typically 600–900°C) for its core industrial operations — heat that must be supplied by boilers, furnaces or direct combustion, and losses through uninsulated vessels and piping represent wasted fuel. Removable modular insulation can cut those losses by 80–96%, surface-cooling equipment to ≤45°C, with payback often under 2 years. Lime plants calcine limestone in hot kilns at 800–900°C, and the hot quicklime must be handled in insulated vessels to prevent reaction with moisture.

Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.

What 194,166 t CO₂e a year looks like

This facility's estimated annual CO₂e (Climate TRACE, modelled) in everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest lime plants in Germany

Listed capacity (t of lime), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Fels-Werke Gmbh sits in a temperate oceanic climate zone (Köppen Cfb), at 52.5°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

Site climate & environmental severity

The local climate sets how fast unprotected steel, protective coatings and the insulation on hot process equipment degrade at this site. It sits in a mild atmospheric environment (estimated ISO 9223 class C2 — Low), with humidity / wetness the leading environmental stress.

In this site’s local climate, a bare 150 °C surface sheds about 1410 W/m² to ambient — roughly 1.08× the loss at a 20 °C reference; removable insulation recovers about 1340 W/m² of that. Reference-surface calculation at a 150 °C surface from WorldClim climate normals (ASTM C680 / ISO 12241) — an indicative per-climate comparison, not a measurement of this site’s specific equipment. Open method dataset: DOI 10.5281/zenodo.20787408 (CC BY 4.0).

Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.

Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.

How it compares & nearby sites

The #7 largest of 8 lime plants in Germany by listed capacity (Climate TRACE).

Nearby industrial sites

• Rudersdorf Cement Plant · Cement Plant · 239,259 t CO₂
• Riva Hennigsdorfer Electric Steel Works · Steel Plant · 59,812 t CO₂
• ArcelorMittal Eisenhüttenstadt steel plant · Steel Plant · 3,115,178 t CO₂
• PCK Schwedt Refinery · Refinery · 2,225,769 t CO₂
• Riva Brandenburg Electric Steel Works · Steel Plant · 107,661 t CO₂
• Wittenberg Fertilizers Complex · Chemical Plant · 1,347,103 t CO₂

Location

Coordinates 52.48645, 13.83005. View on OpenStreetMap.

Heat loss & insulation profile

For a lime plant, the main modular-insulation targets are kiln, preheater, hot-gas ducting, valves & dampers. Typical hot-surface ranges used for screening: 200–900 °C.

calcination-heavy like cement; fuel side only.

Indicative recoverable energy

A first-pass insulation screen suggests about 5,000 MWh/year of recoverable heat-loss reduction and about 1,700 t CO₂e/year of avoided emissions. Screening estimate scaled from installed process-heat projects and surface-temperature reduction data.

See Inzonex Modular Insulation → Run the calculator →

Screening calculation from facility class, capacity and open emissions/energy context. Engineering survey required before procurement.

Safety & the no-regret first step

Start with a thermal survey of valves, flanges, doors and bends. Removable modular insulation keeps maintenance access open while lowering exposed-surface temperature and wasted heat.

Germany: funding & obligation

Funding. Grant 20-60% depending on module and company size; Modul 4 = energy/resource optimization of plants & processes (insulation fits). Foerderwettbewerb round budget ~EUR 60M. official source · verified 2026

Obligation. Mandatory energy audit if avg final energy 2.77-23.6 GWh/yr; certified EnMS/EMS if >23.6 GWh/yr; implementation plans for economically viable measures within 3 months of audit. (applies as a rule above the stated threshold — we do not hold this site's metered energy use). official source · verified 2026
Status: Thresholds are an April-2026 DRAFT amendment (previously 7.5 GWh EnMS) — confirm enacted before publishing.

Programme terms verified 2026-06-18; confirm the current open phase before applying. Eligibility depends on a site's energy use / headcount, which we do not hold — not a per-facility eligibility determination.

Frequently asked questions