Changsheng Gypsum Powder Factory In Jingtai County — China
Lime Plant in China. Approximate location 37.23428, 103.87542.
Lime PlantChinaCO₂ not individually reported
Changsheng Gypsum Powder Factory In Jingtai County is a lime plant in China. Lime plants calcine limestone in kilns at 800–900°C; the quicklime they produce reacts with moisture and has to be kept dry. No facility-measured CO₂ figure is available in the open dataset used here.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38468822.
Data status
Known source data
Calculated from the dataset
Not available
Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.
Operating power plants within 50 km
- Jingtai A · Solar · 65 MW · 19 km
- Jingtai B · Solar · 20 MW · 20 km
- Jingtai CPI · Solar · 20 MW · 20 km
- Datang Jingtai power station · Coal · 1,320 MW · 26 km
PowerAtlas operating assets, ordered by great-circle distance from published coordinates.
In context: how this facility compares
Subsector: lime. As lime plant, it requires high process heat (typically 600–900°C) for its core industrial operations, supplied by boilers, furnaces or direct combustion. Lime plants calcine limestone in kilns at 800–900°C; the quicklime they produce reacts with moisture and has to be kept dry.
Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.
Carbon emissions
No facility-measured CO₂ is published for Changsheng Gypsum Powder Factory In Jingtai County; Climate TRACE provides only a lime plant sector-level estimate, so a precise per-site figure, ranking or carbon cost would be misleading and is not shown.
CO₂: Climate TRACE sector-level estimate (not facility-measured).
Local climate
Changsheng Gypsum Powder Factory In Jingtai County sits in a cold semi-arid steppe climate zone (Köppen BSk), at 37.2°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
Site climate & environmental severity
This site sits in a benign, low-corrosion environment (estimated ISO 9223 class C1 — Very low), with dust abrasion the leading environmental stress.
In this site’s local climate, a bare 150 °C surface sheds about 1422 W/m² to ambient — roughly 1.09× the loss at a 20 °C reference. Reference-surface calculation at a 150 °C surface from WorldClim climate normals (ASTM C680 / ISO 12241) — an indicative per-climate comparison, not a measurement of this site’s specific equipment. Open method dataset: DOI 10.5281/zenodo.20787408 (CC BY 4.0).
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
How it compares & nearby sites
Nearby industrial sites
- Yongdengpingcheng Zhongxing Lime Factory · Lime Plant
- Yongdeng County Yuxin Lime Factory · Lime Plant
- Lanzhou Red Lion Cement Co Ltd Cement Plant · Cement Plant · 786,681 t CO₂
- Sinoma Gansu Cement Co Ltd Cement Plant · Cement Plant · 444,337 t CO₂
- China · Chemical Plant · 8,163,612 t CO₂
- Yongdeng Zhongping Lime Factory · Lime Plant
Location
Coordinates 37.23428, 103.87542. View on OpenStreetMap.
Frequently asked questions
What type of facility is Changsheng Gypsum Powder Factory In Jingtai County?
Changsheng Gypsum Powder Factory In Jingtai County is a lime plant in China. Lime plants calcine limestone in kilns at 800–900°C; the quicklime they produce reacts with moisture and has to be kept dry.
How much CO₂ does Changsheng Gypsum Powder Factory In Jingtai County emit?
The open dataset used here does not include a facility-level CO₂ value for Changsheng Gypsum Powder Factory In Jingtai County.
Where is Changsheng Gypsum Powder Factory In Jingtai County located?
Changsheng Gypsum Powder Factory In Jingtai County is in China at approximately 37.23428, 103.87542.