Steel Plant in Germany. Approximate location 52.46763, 7.3177.
Steel PlantGermanyCO₂ estimate (modelled)
Benteler Steel Tube Lingen plant is a steel plant in Germany. Its listed capacity is 650,000 t of steel. Steel plants burn coal in blast furnaces or use electric arcs to melt scrap; in both cases the molten metal must be kept above 1,500°C and transferred through extensive hot piping and vessels. It is operated by Benteler Steel/Tube GmbH. By capacity it ranks #10 among 11 steel plants in Germany. It emits about 38,878 t CO₂e a year from Climate TRACE, roughly comparable to the annual emissions of 9.1k passenger cars. Its CO₂ per unit of capacity is 94% below the national median for this sector.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1566785.
Source data, measured cross-checks and calculated values are kept separate. No confidence percentage is invented.
Same Climate TRACE subsector; closest non-placeholder modelled CO₂e values. Russia and Belarus excluded.
PowerAtlas operating assets, ordered by great-circle distance from published coordinates.
At 650,000 t of steel, Benteler Steel Tube Lingen plant is below the median steel plant in Germany (2,760,000 t of steel). Subsector: iron-and-steel. As steel plant, it requires high process heat (typically 800–1500°C) for its core industrial operations — heat that must be supplied by boilers, furnaces or direct combustion, and losses through uninsulated vessels and piping represent wasted fuel. Removable modular insulation can cut those losses by 80–96%, surface-cooling equipment to ≤45°C, with payback often under 2 years. Steel plants burn coal in blast furnaces or use electric arcs to melt scrap; in both cases the molten metal must be kept above 1,500°C and transferred through extensive hot piping and vessels.
Capacity & CO₂-intensity comparison computed from Climate TRACE industrial facilities data; sector role based on engineering reference.
This facility's estimated annual CO₂e (Climate TRACE, modelled) in everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
At its reported 39k t CO₂e/yr (Scope 1), Benteler Steel Tube Lingen plant carries €3.1M/yr of carbon at the full EU ETS price (€79/t CO₂). Free allocation phases out to 2034 (Reg. (EU) 2023/956), so today's bill is lower and rising toward this full-price figure. The fastest decarbonization lever is energy efficiency: eliminating heat loss on hot equipment (removable insulation, steam & waste-heat recovery) typically cuts 2–5% of fuel-related CO₂ — here ≈778 t–2k t/yr, worth €62k–€154k, with payback up to 2 years.
Carbon price: EU ETS €79/t · EU ETS €79/t, July 2, 2026, refreshed live via Carbon Hub. CO₂: Climate TRACE. Efficiency range: US DOE / ASTM C680 (method). Indicative carbon value, not the cash bill — free allocation applies; not compliance advice. Estimate the saving for this site →
Listed capacity (t of steel), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by Benteler Steel/Tube GmbH.
Benteler Steel Tube Lingen plant sits in a temperate oceanic climate zone (Köppen Cfb), at 52.5°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The local climate sets how fast unprotected steel, protective coatings and the insulation on hot process equipment degrade at this site. It sits in a moderately corrosive environment (estimated ISO 9223 class C3 — Medium), with humidity / wetness the leading environmental stress.
In this site’s local climate, a bare 150 °C surface sheds about 1405 W/m² to ambient — roughly 1.08× the loss at a 20 °C reference; removable insulation recovers about 1335 W/m² of that. Reference-surface calculation at a 150 °C surface from WorldClim climate normals (ASTM C680 / ISO 12241) — an indicative per-climate comparison, not a measurement of this site’s specific equipment. Open method dataset: DOI 10.5281/zenodo.20787408 (CC BY 4.0).
Higher environmental severity is exactly where protective removable insulation pays back most: a sheltered micro-climate slows corrosion, UV and thermal-cycling damage and extends outdoor hardware service life. This is an indicative site-climate context — not a condition assessment of any specific plant or operator.
Indicative estimate via the ISO 9223:2012 informative method (atmospheric corrosivity from temperature, time-of-wetness and airborne salinity), using WorldClim climate normals, the Köppen-Geiger class and coast distance. Indicative, not a measured corrosion rate.
The #10 largest of 11 steel plants in Germany by listed capacity (Climate TRACE).
Coordinates 52.46763, 7.3177. View on OpenStreetMap.
For a steel plant, the main modular-insulation targets are reheat & annealing furnaces, ladles, hot-blast stoves, steam & gas ducting. Typical hot-surface ranges used for screening: 200–1,200 °C.
A first-pass insulation screen suggests about 3,600 MWh/year of recoverable heat-loss reduction and about 1,200 t CO₂e/year of avoided emissions. Screening estimate scaled from installed process-heat projects and surface-temperature reduction data.
See Inzonex Modular Insulation → Run the calculator →
Screening calculation from facility class, capacity and open emissions/energy context. Engineering survey required before procurement.
Start with a thermal survey of valves, flanges, doors and bends. Removable modular insulation keeps maintenance access open while lowering exposed-surface temperature and wasted heat.
Funding. Grant 20-60% depending on module and company size; Modul 4 = energy/resource optimization of plants & processes (insulation fits). Foerderwettbewerb round budget ~EUR 60M. official source · verified 2026
Obligation. Mandatory energy audit if avg final energy 2.77-23.6 GWh/yr; certified EnMS/EMS if >23.6 GWh/yr; implementation plans for economically viable measures within 3 months of audit. (applies as a rule above the stated threshold — we do not hold this site's metered energy use). official source · verified 2026
Status: Thresholds are an April-2026 DRAFT amendment (previously 7.5 GWh EnMS) — confirm enacted before publishing.
Programme terms verified 2026-06-18; confirm the current open phase before applying. Eligibility depends on a site's energy use / headcount, which we do not hold — not a per-facility eligibility determination.
Benteler Steel Tube Lingen plant is a steel plant in Germany. Steel plants burn coal in blast furnaces or use electric arcs to melt scrap; in both cases the molten metal must be kept above 1,500°C and transferred through extensive hot piping and vessels.
The open dataset lists 650,000 t of steel of capacity for Benteler Steel Tube Lingen plant.
The page uses about 38,878 t CO₂e/year from the open dataset It ranks #115 among facilities in Germany by estimated CO₂.
Benteler Steel Tube Lingen plant is in Germany at approximately 52.46763, 7.3177.
The operator recorded in the open dataset is Benteler Steel/Tube GmbH.
