Cement Plant in Germany. Approximate location 52.48895, 13.83415.
Cement PlantGermanyCO₂ reported
Rudersdorf Cement Plant is a cement plant in Germany with a reported capacity of 1,900,000 t of cement. It burns limestone in high-temperature rotary kilns to make clinker and cement. It is operated by CEMEX Deutschland AG. By capacity it ranks #2 of 32 cement plants tracked in Germany. It emits about 239,259 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 55,771 cars. Its CO₂ per unit of capacity is about 65% below the median cement plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1896603.
Con 1,900,000 t of cement, Rudersdorf Cement Plant è ben al di sopra di la mediana di cement plant in Germany (1,000,000 t of cement). Il suo CO₂ per unità di capacità è approssimativamente 60% al di sotto di la mediana di cement plant. Sottosettore: cement. Come cement plant, richiede calore di processo intenso (tipicamente 800–1400°C) per le sue operazioni industriali essenziali — calore che deve essere fornito da caldaie, forni o combustione diretta, e le perdite attraverso recipienti e tubazioni non isolati rappresentano carburante sprecato. L'isolamento modulare removibile può ridurre queste perdite dell'80–96%, raffreddando superfici a ≤45°C, con payback spesso inferiore a 2 anni. Le cementerie riscaldano il calcare a 1.400°C in forni rotativi — uno dei processi industriali più caldi — e devono controllare la temperatura con precisione lungo l'intera lunghezza del forno.
Confronto di capacità e intensità di CO₂ calcolato dai dati delle strutture industriali Climate TRACE; ruolo del settore basato su riferimento ingegneristico.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of cement), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by CEMEX Deutschland AG. All facilities by this operator →
Rudersdorf Cement Plant sits in a temperate oceanic climate zone (Köppen Cfb), at 52.5°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #2 largest of 32 cement plants in Germany by reported capacity.
Coordinates 52.48895, 13.83415. View on OpenStreetMap.
A cement plant like this runs hot equipment that sheds heat continuously: rotary kiln shell, preheater tower, tertiary air duct & kiln hood, clinker-cooler ducts, valves (surface/process temperatures around 200–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
60% of cement CO2 is process calcination - NOT insulation-addressable; energy here is the fuel side only.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 8,500 MWh/yr (≈ 2,900 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Funding. Grant 20-60% depending on module and company size; Modul 4 = energy/resource optimization of plants & processes (insulation fits). Foerderwettbewerb round budget ~EUR 60M.
Obligation. Mandatory energy audit if avg final energy 2.77-23.6 GWh/yr; certified EnMS/EMS if >23.6 GWh/yr; implementation plans for economically viable measures within 3 months of audit. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).
Verified 2026; confirm current scheme terms before applying.
Rudersdorf Cement Plant is a cement plant in Germany. It burns limestone in high-temperature rotary kilns to make clinker and cement.
Rudersdorf Cement Plant has a reported capacity of 1,900,000 t of cement.
Rudersdorf Cement Plant emits about 239,259 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 55,771 cars. That ranks #64 among tracked facilities in Germany.
Rudersdorf Cement Plant is in Germany, near coordinates 52.48895, 13.83415.
Rudersdorf Cement Plant is operated by CEMEX Deutschland AG.
