Tidewater Prince George Refinery

Tidewater Prince George Refinery is a refinery in Canada with a reported capacity of 12,000 BBL per day. It processes crude oil into fuels and petrochemical feedstocks through distillation, cracking and reforming. It is operated by Tidewater Midstream and Infrastructure Ltd. By capacity it ranks #18 of 18 oil refineries tracked in Canada. It emits about 78,836 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 18,377 cars. Its CO₂ per unit of capacity is about 22% below the median refinery.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3143782.

في السياق: كيف يتم مقارنة هذا المنشأة

عند 12,000 BBL per day، يكون Tidewater Prince George Refinery أقل من متوسط refinery في Canada (112,000 BBL per day). CO₂ لكل وحدة سعة هو تقريباً 34% أقل من متوسط refinery. القطاع الفرعي: oil-and-gas-refining. كـ refinery، يتطلب حرارة عملية مكثفة (عادة 200–600°C) لعملياته الصناعية الأساسية — حرارة يجب توفيرها بواسطة الغلايات أو الأفران أو الاحتراق المباشر، والخسائر من خلال الحاويات والأنابيب غير المعزولة تمثل وقود مهدر. يمكن للعزل المعياري القابل للإزالة أن يقلل هذه الخسائر بمقدار 80-96٪، وتبريد الأسطح إلى ≤45°C، مع فترة استرجاع غالباً أقل من سنتين. تقوم المصافي بتسخين وتجزئة وتحويل النفط الخام كيميائياً إلى الوقود والمواد الخام البتروكيميائية من خلال التقطير والتكسير اللذين يتطلبان طاقة كثيفة — متطلبة بشكل استثنائي لتوليد البخار وتعافي الحرارة.

مقارنة السعة وكثافة CO₂ محسوبة من بيانات منشآت Climate TRACE الصناعية؛ دور القطاع بناءً على مرجع الهندسة.

What 78,836 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest oil refineries in Canada

Reported capacity (BBL per day), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Operator

Operated by Tidewater Midstream and Infrastructure Ltd. All facilities by this operator →

Local climate

Tidewater Prince George Refinery sits in a warm-summer humid continental climate zone (Köppen Dfb), at 53.9°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #18 largest of 18 oil refineries in Canada by reported capacity.

Nearby industrial sites

• Prince George (PG) Pulp and Paper Mill · Pulp & Paper Mill · 88,433 t CO₂
• Canfor Pulp Limited - Northwood Pulp Mill · Pulp & Paper Mill · 88,433 t CO₂
• Northwood Kraft Pulp Mill · Pulp & Paper Mill · 88,433 t CO₂
• Quesnel BCTMP Pulp Mill · Pulp & Paper Mill · 97,116 t CO₂
• Quesnel River Pulp Co - West Fraser Timber Group · Pulp & Paper Mill · 88,433 t CO₂
• Quesnel Market Pulp Mill · Pulp & Paper Mill · 88,433 t CO₂

Location

Coordinates 53.9275, -122.69836. View on OpenStreetMap.

Heat loss & insulation profile

A refinery like this runs hot equipment that sheds heat continuously: crude & vacuum distillation columns, fired heaters, heat exchangers, steam lines, valves & flanges (surface/process temperatures around 150–550 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 31,000 MWh/yr (≈ 6,200 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

External climate finance your country can access

Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:

• Japan JCM (Joint Crediting Mechanism) — Japan co-finances diffusion of decarbonising tech incl. INDUSTRIAL ENERGY EFFICIENCY in partner countries, in exchange for carbon credits. Channels: MOEJ model projects, ADB trust funds, NEDO demonstrations.
• UK International Climate Finance (ICF / ODA) — ~GBP 6bn ODA over 3 yrs; industrial-decarbonisation flows via Climate Investment Funds (CIF) - Clean Technology Fund.
• Green Climate Fund (GCF) + ADB / World Bank / UNIDO — Concessional finance & grants for industrial energy efficiency. E.g. GCF $200M ADB-led India Green Finance Facility; World Bank FP071 'Scaling Up Energy Efficiency for Industrial Enterprises in Vietnam'; ASEAN ACGF energy-efficiency revolving funds incl. SMEs.

Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.

Frequently asked questions