Home / Europe / Sweden / Non-ferrous metals plants / Kubikenborg Aluminium AB

Kubikenborg Aluminium AB

Metals Plant in Sweden. Approximate location 62.37568, 17.36377.

Metals PlantSwedenCO₂ reported

Kubikenborg Aluminium AB is a non-ferrous metals plant in Sweden with a reported capacity of 1 unitless. It smelts or refines non-ferrous metals. By capacity it ranks #2 of 3 non-ferrous metals plants tracked in Sweden. It emits about 183,000 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 42,657 cars. Its CO₂ per unit of capacity is about 298% above the median non-ferrous metals plant.

1unitless
183,000t CO₂e / yr (Climate TRACE)
#20CO₂ rank in Sweden
183000.00t CO₂ per capacity unit

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3673405.

في السياق: كيف يتم مقارنة هذا المنشأة

عند 1 unitless، يكون Kubikenborg Aluminium AB حوالي متوسط non-ferrous metals plant في Sweden (1 unitless). القطاع الفرعي: other-metals. كـ non-ferrous metals plant، يتطلب حرارة عملية مكثفة (عادة 400–1200°C) لعملياته الصناعية الأساسية — حرارة يجب توفيرها بواسطة الغلايات أو الأفران أو الاحتراق المباشر، والخسائر من خلال الحاويات والأنابيب غير المعزولة تمثل وقود مهدر. يمكن للعزل المعياري القابل للإزالة أن يقلل هذه الخسائر بمقدار 80-96٪، وتبريد الأسطح إلى ≤45°C، مع فترة استرجاع غالباً أقل من سنتين. تقوم مصانع المعادن غير الحديدية بصهر وتحسين وصب المعادن في أفران وبواتق فوق نقاط انصهارها؛ الخسائر من النقل غير المعزول والحاويات الاحتفاظ كبيرة.

مقارنة السعة وكثافة CO₂ محسوبة من بيانات منشآت Climate TRACE الصناعية؛ دور القطاع بناءً على مرجع الهندسة.

What 183,000 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

42,657cars driven for a year
23,865homes' annual energy use
3,050,000tree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest non-ferrous metals plants in Sweden

Rönnskärsverken: 1 unitless1Rönnskärsv…Kubikenborg Aluminium AB: 1 unitless1Kubikenbor…Vargön Alloys AB: 1 unitless1Vargön All…

Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Kubikenborg Aluminium AB sits in a subarctic (boreal) climate zone (Köppen Dfc), at 62.4°N in the northern hemisphere.

~0°Ctypical annual mean
~14°Ctypical warm-season
Subarctic (boreal): long cold winters and short, cool summers

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #2 largest of 3 non-ferrous metals plants in Sweden by reported capacity.

Nearby industrial sites

Location

Coordinates 62.37568, 17.36377. View on OpenStreetMap.

Heat loss & insulation profile

A non-ferrous metals plant like this runs hot equipment that sheds heat continuously: furnaces, ladles, heat-treatment ovens, ducting & valves (surface/process temperatures around 150–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 2,700 MWh/yr (≈ 540 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

EU: funding & obligation

Obligation. Under the EU Energy Efficiency Directive (Art. 8), large undertakings (>250 staff or >€50M turnover / >€43M balance) must run an energy audit every 4 years or operate a certified energy management system (ISO 50001).

Funding. National energy-efficiency grants and white-certificate schemes typically apply — check the local programme.

EED Article 8, transposed nationally. Confirm current national terms.

Frequently asked questions

What type of facility is Kubikenborg Aluminium AB?

Kubikenborg Aluminium AB is a non-ferrous metals plant in Sweden. It smelts or refines non-ferrous metals.

What is the capacity of Kubikenborg Aluminium AB?

Kubikenborg Aluminium AB has a reported capacity of 1 unitless.

How much CO₂ does Kubikenborg Aluminium AB emit?

Kubikenborg Aluminium AB emits about 183,000 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 42,657 cars. That ranks #20 among tracked facilities in Sweden.

Where is Kubikenborg Aluminium AB located?

Kubikenborg Aluminium AB is in Sweden, near coordinates 62.37568, 17.36377.

Built from open public data; no personal information. Operate this site? Request a correction or removal.