Metals Plant in United States. Approximate location 40.44979, -80.60923.
Metals PlantUnited StatesCO₂ reported
TITANIUM METALS CORP TORONTO PLANT is a non-ferrous metals plant in United States with a reported capacity of 1 unitless. It smelts or refines non-ferrous metals. By capacity it ranks #165 of 330 non-ferrous metals plants tracked in United States. It emits about 37,338 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 8,703 cars. Its CO₂ per unit of capacity is about 19% below the median non-ferrous metals plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-3673503.
在1 unitless时，TITANIUM METALS CORP TORONTO PLANT是United States中non-ferrous metals plant的中位数约 1 unitless。 子部门：other-metals。 作为non-ferrous metals plant，它需要强烈的工艺热量（通常400–1200°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 有色金属厂在其熔点以上的炉和坩埚中熔化、精炼和铸造金属；来自未隔热转移和储存容器的损失是显著的。
容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (unitless), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
TITANIUM METALS CORP TORONTO PLANT sits in a humid subtropical climate zone (Köppen Cfa), at 40.4°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #165 largest of 330 non-ferrous metals plants in United States by reported capacity.
Coordinates 40.44979, -80.60923. View on OpenStreetMap.
A non-ferrous metals plant like this runs hot equipment that sheds heat continuously: furnaces, ladles, heat-treatment ovens, ducting & valves (surface/process temperatures around 150–1,000 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,500 MWh/yr (≈ 310 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.
Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).
Verified 2026; confirm current scheme terms before applying.
TITANIUM METALS CORP TORONTO PLANT is a non-ferrous metals plant in United States. It smelts or refines non-ferrous metals.
TITANIUM METALS CORP TORONTO PLANT has a reported capacity of 1 unitless.
TITANIUM METALS CORP TORONTO PLANT emits about 37,338 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 8,703 cars. That ranks #1256 among tracked facilities in United States.
TITANIUM METALS CORP TORONTO PLANT is in United States, near coordinates 40.44979, -80.60923.
