Steel Plant in United States. Approximate location 30.9423, -88.01286.
Steel PlantUnited StatesCO₂ reported
SSAB Americas Alabama steel plant is a steel plant in United States with a reported capacity of 1,250,000 t of steel. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace). It is operated by SSAB Americas Holding AB. By capacity it ranks #28 of 75 steel plants tracked in United States. It emits about 69,378 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 16,172 cars. Its CO₂ per unit of capacity is about 90% below the median steel plant.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-1567114.
在1,250,000 t of steel时,SSAB Americas Alabama steel plant是United States中steel plant的中位数远高于 1,000,000 t of steel。 其单位容量的CO₂约为steel plant中位数的低于 50%。 子部门:iron-and-steel。 作为steel plant,它需要强烈的工艺热量(通常800–1500°C)来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量,通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%,将表面冷却至≤45°C,投资回收期通常不到2年。 钢铁厂在高炉中燃烧煤炭或使用电弧熔化废料;在两种情况下,熔融金属都必须保持在1,500°C以上并通过广泛的热管和容器转移。
容量和CO₂强度比较从Climate TRACE工业设施数据计算得出;部门角色基于工程参考。
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (t of steel), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Operated by SSAB Americas Holding AB. All facilities by this operator →
SSAB Americas Alabama steel plant sits in a humid subtropical climate zone (Köppen Cfa), at 30.9°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #28 largest of 75 steel plants in United States by reported capacity.
Coordinates 30.9423, -88.01286. View on OpenStreetMap.
Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

SSAB Americas Alabama steel plant is a steel plant in United States. It produces crude steel from iron ore (blast furnace) or scrap (electric arc furnace).
SSAB Americas Alabama steel plant has a reported capacity of 1,250,000 t of steel.
SSAB Americas Alabama steel plant emits about 69,378 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 16,172 cars. That ranks #819 among tracked facilities in United States.
SSAB Americas Alabama steel plant is in United States, near coordinates 30.9423, -88.01286.
SSAB Americas Alabama steel plant is operated by SSAB Americas Holding AB.